Products > C2K Cable Gland
explosive atmosphere univeral armored gland

C2K Cable Gland
explosive atmosphere univeral armored gland

Internationally Approved, Ex e, Explosive Atmosphere Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Integral protected deluge seal
• -60°C to +130°C (standard), -20°C to 200°C (ThermEx option page 91)
• Class I Zone 1, 21 and Zone 2
• Internationally marked, IECEx & ATEX
• EMC tested

For under / oversized armour wires

For all types of Armoured cables

Description

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1070X, SIRA13ATEX4076X
Code of Protection II 2G, II 1D, Ex e IIC Gb, Ex ta IIIC Da
Compliance Standards EN 60079-0,7,31
IECEx Certificate IECEx SIR 13.0025X
Code of Protection Ex e IIC Gb, Ex ta IIIC Da
Compliance Standards IEC 60079-0,7,31
EAC Certificate C-GB.AA87.B.00487
CCOE / PESO (India) Certificate P333688
NEPSI Certificate GYJ13.1140X
INMETRO Approval TÜV 12.0617X
RETIE Approval 03866
Marine Approvals LRS: 01/00172, DNV: TAE00000Y, ABS: 16-LD1478091-PDA, BV: 43180/A1BV
Ingress Protection Rating ** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour
(PWA), Steel Tape Armour (STA), Wire Braid Armour (e.g. SWB), Aluminium Strip
Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Armoured &
Jacketed
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20S16 M20 15.0 ½” 19.9 ¾” 8.7 6.1 13.1 0.3 1.0 0.8 1.25 30.5 33.6 65.0 20S16 C2K 1RA PVC04 0.23
20S M20 15.0 ½” 19.9 ¾” 11.7 9.5 15.9 0.3 1.0 0.8 1.25 30.5 33.6 62.0 20S C2K 1RA PVC04 0.24
20 M20 15.0 ½” 19.9 ¾” 14.0 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 63.0 20 C2K 1RA PVC06 0.22
25S M25 15.0 ¾” 20.2 1″ 20.0 14.0 22.0 0.4 1.2 1.25 1.6 37.5 41.3 69.5 25S C2K 1RA PVC09 0.35
25 M25 15.0 ¾” 20.2 1″ 20.0 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 69.5 25 C2K 1RA PVC09 0.35
32 M32 15.0 1″ 25.0 1 ¼” 26.0 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 75.0 32 C2K 1RA PVC11 0.55
40 M40 15.0 1 ¼” 25.6 1 ½” 32.2 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 75.0 40 C2K 1RA PVC15 0.75
50S M50 15.0 1 ½” 26.1 2″ 38.2 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 77.0 50S C2K 1RA PVC18 0.86
50 M50 15.0 2″ 26.9 2 ½” 44.1 40.4 53.0 0.6 1.6 2.0 2.5 70.1 77.1 77.0 50 C2K 1RA PVC21 1.13
63S M63 15.0 2″ 26.9 2 ½” 50.0 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 80.0 63S C2K 1RA PVC23 1.35
63 M63 15.0 2 ½” 39.9 3″ 56.0 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 80.0 63 C2K 1RA PVC25 1.34
75S M75 15.0 2 ½” 39.9 3″ 62.0 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 87.0 75S C2K 1RA PVC28 2.02
75 M75 15.0 3″ 41.5 3 ½” 64.2 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110.0 88.0 75 C2K 1RA PVC30 2.48
90 M90 24.0 3 ½” 42.8 4″ 78.6 76.2 90.3 0.8 1.6 3.15 4.0 115.0 126.5 102.0 90 C2K 1RA PVC32 3.52
100 M100 24.0 3 ½” 42.8 4″ 91.0 86.1 101.4 0.8 1.6 3.15 4.0 127.0 139.7 114.0 100 C2K 1RA LSF33 4.58
115 M115 24.0 4″ 44.0 5″ 98.0 101.5 110.2 0.8 1.6 3.15 4.0 133.4 146.7 114.0 115 C2K 1RA LSF34 6.50
130 M130 24.0 5″ 46.8 115.0 110.2 123.2 0.8 1.6 3.15 4.0 152.4 167.6 114.0 130 C2K 1RA LSF35 8.50
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20S16 M20 0.59 ½” 0.78 ¾” 0.34 0.24 0.52 0.01 0.04 0.03 0.05 1.20 1.32 2.56 20S16 C2K 1RA PVC04 8.11
20S M20 0.59 ½” 0.78 ¾” 0.46 0.37 0.63 0.01 0.04 0.03 0.05 1.20 1.32 2.44 20S C2K 1RA PVC04 8.47
20 M20 0.59 ½” 0.78 ¾” 0.55 0.49 0.82 0.02 0.04 0.03 0.05 1.20 1.32 2.48 20 C2K 1RA PVC06 7.76
25S M25 0.59 ¾” 0.80 1″ 0.79 0.55 0.87 0.02 0.05 0.05 0.06 1.48 1.63 2.74 25S C2K 1RA PVC09 12.35
25 M25 0.59 ¾” 0.80 1″ 0.79 0.72 1.03 0.02 0.05 0.05 0.06 1.48 1.63 2.74 25 C2K 1RA PVC09 12.35
32 M32 0.59 1″ 0.98 1 ¼” 1.02 0.93 1.33 0.02 0.05 0.06 0.08 1.81 1.99 2.95 32 C2K 1RA PVC11 19.40
40 M40 0.59 1 ¼” 1.01 1 ½” 1.27 1.10 1.59 0.02 0.06 0.06 0.08 2.17 2.38 2.95 40 C2K 1RA PVC15 26.46
50S M50 0.59 1 ½” 1.03 2″ 1.50 1.39 1.84 0.02 0.06 0.08 0.10 2.36 2.60 3.03 50S C2K 1RA PVC18 30.34
50 M50 0.59 2″ 1.06 2 ½” 1.74 1.59 2.09 0.02 0.06 0.08 0.10 2.76 3.04 3.03 50 C2K 1RA PVC21 39.86
63S M63 0.59 2″ 1.06 2 ½” 1.97 1.80 2.34 0.02 0.06 0.08 0.10 2.95 3.25 3.15 63S C2K 1RA PVC23 47.62
63 M63 0.59 2 ½” 1.57 3″ 2.20 2.15 2.59 0.02 0.06 0.08 0.10 3.15 3.46 3.15 63 C2K 1RA PVC25 47.27
75S M75 0.59 2 ½” 1.57 3″ 2.44 2.32 2.83 0.02 0.06 0.08 0.10 3.54 3.90 3.43 75S C2K 1RA PVC28 71.25
75 M75 0.59 3″ 1.63 3 ½” 2.53 2.63 3.09 0.02 0.06 0.10 0.12 3.94 4.33 3.46 75 C2K 1RA PVC30 87.48
90 M90 0.94 3 ½” 1.69 4″ 3.09 3.00 3.56 0.03 0.06 0.12 0.16 4.53 4.98 4.02 90 C2K 1RA PVC32 124.16
100 M100 0.94 3 ½” 1.69 4″ 3.58 3.39 3.99 0.03 0.06 0.12 0.16 5.00 5.50 4.49 100 C2K 1RA LSF33 161.55
115 M115 0.94 4″ 1.73 5″ 3.86 4.00 4.34 0.03 0.06 0.12 0.16 5.25 5.78 4.49 115 C2K 1RA LSF34 229.28
130 M130 0.94 5″ 1.84 4.53 4.34 4.85 0.03 0.06 0.12 0.16 6.00 6.60 4.49 130 C2K 1RA LSF35 299.83
Dimensions displayed in inches unless otherwise stated

Download Spec Sheet

Download

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1070X, SIRA13ATEX4076X
Code of Protection II 2G, II 1D, Ex e IIC Gb, Ex ta IIIC Da
Compliance Standards EN 60079-0,7,31
IECEx Certificate IECEx SIR 13.0025X
Code of Protection Ex e IIC Gb, Ex ta IIIC Da
Compliance Standards IEC 60079-0,7,31
EAC Certificate C-GB.AA87.B.00487
CCOE / PESO (India) Certificate P333688
NEPSI Certificate GYJ13.1140X
INMETRO Approval TÜV 12.0617X
RETIE Approval 03866
Marine Approvals LRS: 01/00172, DNV: TAE00000Y, ABS: 16-LD1478091-PDA, BV: 43180/A1BV
Ingress Protection Rating ** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour
(PWA), Steel Tape Armour (STA), Wire Braid Armour (e.g. SWB), Aluminium Strip
Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Armoured &
Jacketed
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20S16 M20 15.0 ½” 19.9 ¾” 8.7 6.1 13.1 0.3 1.0 0.8 1.25 30.5 33.6 65.0 20S16 C2K 1RA PVC04 0.23
20S M20 15.0 ½” 19.9 ¾” 11.7 9.5 15.9 0.3 1.0 0.8 1.25 30.5 33.6 62.0 20S C2K 1RA PVC04 0.24
20 M20 15.0 ½” 19.9 ¾” 14.0 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 63.0 20 C2K 1RA PVC06 0.22
25S M25 15.0 ¾” 20.2 1″ 20.0 14.0 22.0 0.4 1.2 1.25 1.6 37.5 41.3 69.5 25S C2K 1RA PVC09 0.35
25 M25 15.0 ¾” 20.2 1″ 20.0 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 69.5 25 C2K 1RA PVC09 0.35
32 M32 15.0 1″ 25.0 1 ¼” 26.0 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 75.0 32 C2K 1RA PVC11 0.55
40 M40 15.0 1 ¼” 25.6 1 ½” 32.2 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 75.0 40 C2K 1RA PVC15 0.75
50S M50 15.0 1 ½” 26.1 2″ 38.2 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 77.0 50S C2K 1RA PVC18 0.86
50 M50 15.0 2″ 26.9 2 ½” 44.1 40.4 53.0 0.6 1.6 2.0 2.5 70.1 77.1 77.0 50 C2K 1RA PVC21 1.13
63S M63 15.0 2″ 26.9 2 ½” 50.0 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 80.0 63S C2K 1RA PVC23 1.35
63 M63 15.0 2 ½” 39.9 3″ 56.0 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 80.0 63 C2K 1RA PVC25 1.34
75S M75 15.0 2 ½” 39.9 3″ 62.0 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 87.0 75S C2K 1RA PVC28 2.02
75 M75 15.0 3″ 41.5 3 ½” 64.2 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110.0 88.0 75 C2K 1RA PVC30 2.48
90 M90 24.0 3 ½” 42.8 4″ 78.6 76.2 90.3 0.8 1.6 3.15 4.0 115.0 126.5 102.0 90 C2K 1RA PVC32 3.52
100 M100 24.0 3 ½” 42.8 4″ 91.0 86.1 101.4 0.8 1.6 3.15 4.0 127.0 139.7 114.0 100 C2K 1RA LSF33 4.58
115 M115 24.0 4″ 44.0 5″ 98.0 101.5 110.2 0.8 1.6 3.15 4.0 133.4 146.7 114.0 115 C2K 1RA LSF34 6.50
130 M130 24.0 5″ 46.8 115.0 110.2 123.2 0.8 1.6 3.15 4.0 152.4 167.6 114.0 130 C2K 1RA LSF35 8.50
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20S16 M20 0.59 ½” 0.78 ¾” 0.34 0.24 0.52 0.01 0.04 0.03 0.05 1.20 1.32 2.56 20S16 C2K 1RA PVC04 8.11
20S M20 0.59 ½” 0.78 ¾” 0.46 0.37 0.63 0.01 0.04 0.03 0.05 1.20 1.32 2.44 20S C2K 1RA PVC04 8.47
20 M20 0.59 ½” 0.78 ¾” 0.55 0.49 0.82 0.02 0.04 0.03 0.05 1.20 1.32 2.48 20 C2K 1RA PVC06 7.76
25S M25 0.59 ¾” 0.80 1″ 0.79 0.55 0.87 0.02 0.05 0.05 0.06 1.48 1.63 2.74 25S C2K 1RA PVC09 12.35
25 M25 0.59 ¾” 0.80 1″ 0.79 0.72 1.03 0.02 0.05 0.05 0.06 1.48 1.63 2.74 25 C2K 1RA PVC09 12.35
32 M32 0.59 1″ 0.98 1 ¼” 1.02 0.93 1.33 0.02 0.05 0.06 0.08 1.81 1.99 2.95 32 C2K 1RA PVC11 19.40
40 M40 0.59 1 ¼” 1.01 1 ½” 1.27 1.10 1.59 0.02 0.06 0.06 0.08 2.17 2.38 2.95 40 C2K 1RA PVC15 26.46
50S M50 0.59 1 ½” 1.03 2″ 1.50 1.39 1.84 0.02 0.06 0.08 0.10 2.36 2.60 3.03 50S C2K 1RA PVC18 30.34
50 M50 0.59 2″ 1.06 2 ½” 1.74 1.59 2.09 0.02 0.06 0.08 0.10 2.76 3.04 3.03 50 C2K 1RA PVC21 39.86
63S M63 0.59 2″ 1.06 2 ½” 1.97 1.80 2.34 0.02 0.06 0.08 0.10 2.95 3.25 3.15 63S C2K 1RA PVC23 47.62
63 M63 0.59 2 ½” 1.57 3″ 2.20 2.15 2.59 0.02 0.06 0.08 0.10 3.15 3.46 3.15 63 C2K 1RA PVC25 47.27
75S M75 0.59 2 ½” 1.57 3″ 2.44 2.32 2.83 0.02 0.06 0.08 0.10 3.54 3.90 3.43 75S C2K 1RA PVC28 71.25
75 M75 0.59 3″ 1.63 3 ½” 2.53 2.63 3.09 0.02 0.06 0.10 0.12 3.94 4.33 3.46 75 C2K 1RA PVC30 87.48
90 M90 0.94 3 ½” 1.69 4″ 3.09 3.00 3.56 0.03 0.06 0.12 0.16 4.53 4.98 4.02 90 C2K 1RA PVC32 124.16
100 M100 0.94 3 ½” 1.69 4″ 3.58 3.39 3.99 0.03 0.06 0.12 0.16 5.00 5.50 4.49 100 C2K 1RA LSF33 161.55
115 M115 0.94 4″ 1.73 5″ 3.86 4.00 4.34 0.03 0.06 0.12 0.16 5.25 5.78 4.49 115 C2K 1RA LSF34 229.28
130 M130 0.94 5″ 1.84 4.53 4.34 4.85 0.03 0.06 0.12 0.16 6.00 6.60 4.49 130 C2K 1RA LSF35 299.83
Dimensions displayed in inches unless otherwise stated