Products > E1U Cable Gland
industrial / general purpose double seal universal gland

E1U Cable Gland
industrial / general purpose double seal universal gland

Double Seal Industrial Cable Gland

• Metal-to-metal armour clamping
• Direct & remote installation
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Displacement type inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Designed to prevent Coldflow
• Deluge protection option
• -60°C to +130°C (standard), -20°C to 200°C (ThermIn option available)
• EMC tested

For under / oversized armour wires

For all types of Armoured Cables

Description

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications * Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
GOST R Certificate POCC.GB.35.H00102
Marine Approvals LRS: 01/00171 (E1), ABS: 16-LD1472056-PDA
Ingress Protection Rating ** IP66 as standard (IP67, IP68 available upon request)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium
Seal Material CMP Thermoset Rubber
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Wire Braid Armour, Aluminium Strip Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Armoured & Jacketed
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20s16 M20 10.0 1/2″ 19.9 3/4″ 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 72.5 20S16 E1U 1RA PVC04 0.16
20S M20 10.0 1/2″ 19.9 3/4″ 6.1 11.6 9.5 15.9 0.3 1.0 0.8 1.25 24.0 26.4 70.0 20S E1U 1RA PVC04 0.15
20 M20 10.0 1/2″ 19.9 3/4″ 6.5 13.9 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 73.0 20 E1U 1RA PVC06 0.21
25S M25 10.0 3/4″ 20.2 1″ 11.1 19.9 14 22 0.4 1.2 1.25 1.6 37.5 41.3 89.0 25S E1U 1RA PVC09 0.33
25 M25 10.0 3/4″ 20.2 1″ 11.1 19.9 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 89.0 25 E1U 1RA PVC09 0.33
32 M32 10.0 1″ 25.0 1 1/4″ 17.0 26.2 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 86.0 32 E1U 1RA PVC11 0.43
40 M40 15.0 1 1/4″ 25.6 1 1/2″ 22.0 32.1 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 90.0 40 E1U 1RA PVC15 0.62
50S M50 15.0 1 1/2″ 26.1 2″ 29.5 38.1 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 91.0 50S E1U 1RA PVC18 0.75
50 M50 15.0 2″ 26.9 2 1/2″ 35.6 44.0 40.4 53 0.6 1.6 2.0 2.5 70.1 77.1 95.0 50 E1U 1RA PVC21 0.95
63S M63 15.0 2″ 26.9 2 1/2″ 40.1 49.9 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 102.0 63S E1U 1RA PVC23 1.34
63 M63 15.0 2 1/2″ 39.9 3″ 47.2 55.9 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 104.0 63 E1U 1RA PVC25 1.34
75S M75 15.0 2 1/2″ 39.9 3″ 52.8 61.9 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 115.0 75S E1U 1RA PVC28 2.11
75 M75 15.0 3″ 41.5 3 1/2″ 59.1 67.9 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110 117.0 75 E1U 1RA PVC30 2.42
90 M90 24.0 3 1/2″ 42.8 4″ 66.6 78.6 76.2 90.3 0.8 1.6 3.15 4.0 114.3 125.4 147.0 90 E1U 1RA PVC32 4.21
100 M100 24.0 4″ 44.0 5″ 76.0 90.9 86.1 101.4 0.8 1.6 3.15 4.0 123.0 135.3 140.0 100 E1U 1RA LSF33 4.45
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 0.8 1.6 3.15 4.0 133.4 146.7 162.0 115 E1U 1RA LSF34 6.19
130 M130 24.0 5″ 46.8 6″ 97.0 114.9 110.2 123.2 0.8 1.6 3.15 4.0 152.4 167.6 174.0 130 E1U 1RA LSF35 8.34
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Ozs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20s16 M20 0.39 1/2″ 0.78 3/4″ 0.12 0.34 0.24 0.52 0.01 0.04 0.03 0.05 0.94 1.04 2.85 20S16 E1U 1RA PVC04 5.75
20S M20 0.39 1/2″ 0.78 3/4″ 0.24 0.46 0.37 0.63 0.01 0.04 0.03 0.05 0.94 1.04 2.76 20S E1U 1RA PVC04 5.29
20 M20 0.39 1/2″ 0.78 3/4″ 0.26 0.55 0.49 0.82 0.02 0.04 0.03 0.05 1.20 1.32 2.87 20 E1U 1RA PVC06 7.41
25S M25 0.39 3/4″ 0.8 1″ 0.44 0.78 0.55 0.87 0.02 0.05 0.05 0.06 1.48 1.63 3.50 25S E1U 1RA PVC09 11.64
25 M25 0.39 3/4″ 0.8 1″ 0.44 0.78 0.72 1.03 0.02 0.05 0.05 0.06 1.48 1.63 3.50 25 E1U 1RA PVC09 11.64
32 M32 0.39 1″ 0.98 1 1/4″ 0.67 1.03 0.93 1.33 0.02 0.05 0.06 0.08 1.81 1.99 3.39 32 E1U 1RA PVC11 15.17
40 M40 0.59 1 1/4″ 1.01 1 1/2″ 0.87 1.26 1.10 1.59 0.02 0.06 0.06 0.08 2.17 2.38 3.54 40 E1U 1RA PVC15 21.87
50S M50 0.59 1 1/2″ 1.03 2″ 1.16 1.50 1.39 1.84 0.02 0.06 0.08 0.10 2.36 2.60 3.58 50S E1U 1RA PVC18 26.46
50 M50 0.59 2″ 1.06 2 1/2″ 1.40 1.73 1.59 2.09 0.02 0.06 0.08 0.10 2.76 3.04 3.74 50 E1U 1RA PVC21 33.51
63S M63 0.59 2″ 1.06 2 1/2″ 1.58 1.96 1.8 2.34 0.02 0.06 0.08 0.10 2.95 3.25 4.02 63S E1U 1RA PVC23 47.27
63 M63 0.59 2 1/2″ 1.57 3″ 1.86 2.20 2.15 2.59 0.02 0.06 0.08 0.10 3.15 3.46 4.09 63 E1U 1RA PVC25 47.27
75S M75 0.59 2 1/2″ 1.57 3″ 2.08 2.44 2.32 2.83 0.02 0.06 0.08 0.10 3.54 3.90 4.53 75S E1U 1RA PVC28 74.43
75 M75 0.59 3″ 1.63 3 1/2″ 2.33 2.67 2.63 3.09 0.02 0.06 0.1 0.12 3.94 4.33 4.61 75 E1U 1RA PVC30 85.36
90 M90 0.94 3 1/2″ 1.69 4″ 2.62 3.09 3.00 3.56 0.03 0.06 0.12 0.16 4.50 4.94 5.79 90 E1U 1RA PVC32 148.5
100 M100 0.94 4″ 1.73 5″ 2.99 3.58 3.39 3.99 0.03 0.06 0.12 0.16 4.84 5.33 5.51 100 E1U 1RA LSF33 156.97
115 M115 0.94 4″ 1.73 5″ 3.39 3.85 4.00 4.34 0.03 0.06 0.12 0.16 5.25 5.78 6.38 115 E1U 1RA LSF34 218.35
130 M130 0.94 5″ 1.84 6″ 3.82 4.52 4.34 4.85 0.03 0.06 0.12 0.16 6.00 6.60 6.85 130 E1U 1RA LSF35 294.19
Dimensions displayed in inches unless otherwise stated

Download Spec Sheet

Download

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications * Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
GOST R Certificate POCC.GB.35.H00102
Marine Approvals LRS: 01/00171 (E1), ABS: 16-LD1472056-PDA
Ingress Protection Rating ** IP66 as standard (IP67, IP68 available upon request)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium
Seal Material CMP Thermoset Rubber
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Wire Braid Armour, Aluminium Strip Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Armoured & Jacketed
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20s16 M20 10.0 1/2″ 19.9 3/4″ 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 72.5 20S16 E1U 1RA PVC04 0.16
20S M20 10.0 1/2″ 19.9 3/4″ 6.1 11.6 9.5 15.9 0.3 1.0 0.8 1.25 24.0 26.4 70.0 20S E1U 1RA PVC04 0.15
20 M20 10.0 1/2″ 19.9 3/4″ 6.5 13.9 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 73.0 20 E1U 1RA PVC06 0.21
25S M25 10.0 3/4″ 20.2 1″ 11.1 19.9 14 22 0.4 1.2 1.25 1.6 37.5 41.3 89.0 25S E1U 1RA PVC09 0.33
25 M25 10.0 3/4″ 20.2 1″ 11.1 19.9 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 89.0 25 E1U 1RA PVC09 0.33
32 M32 10.0 1″ 25.0 1 1/4″ 17.0 26.2 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 86.0 32 E1U 1RA PVC11 0.43
40 M40 15.0 1 1/4″ 25.6 1 1/2″ 22.0 32.1 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 90.0 40 E1U 1RA PVC15 0.62
50S M50 15.0 1 1/2″ 26.1 2″ 29.5 38.1 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 91.0 50S E1U 1RA PVC18 0.75
50 M50 15.0 2″ 26.9 2 1/2″ 35.6 44.0 40.4 53 0.6 1.6 2.0 2.5 70.1 77.1 95.0 50 E1U 1RA PVC21 0.95
63S M63 15.0 2″ 26.9 2 1/2″ 40.1 49.9 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 102.0 63S E1U 1RA PVC23 1.34
63 M63 15.0 2 1/2″ 39.9 3″ 47.2 55.9 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 104.0 63 E1U 1RA PVC25 1.34
75S M75 15.0 2 1/2″ 39.9 3″ 52.8 61.9 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 115.0 75S E1U 1RA PVC28 2.11
75 M75 15.0 3″ 41.5 3 1/2″ 59.1 67.9 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110 117.0 75 E1U 1RA PVC30 2.42
90 M90 24.0 3 1/2″ 42.8 4″ 66.6 78.6 76.2 90.3 0.8 1.6 3.15 4.0 114.3 125.4 147.0 90 E1U 1RA PVC32 4.21
100 M100 24.0 4″ 44.0 5″ 76.0 90.9 86.1 101.4 0.8 1.6 3.15 4.0 123.0 135.3 140.0 100 E1U 1RA LSF33 4.45
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 0.8 1.6 3.15 4.0 133.4 146.7 162.0 115 E1U 1RA LSF34 6.19
130 M130 24.0 5″ 46.8 6″ 97.0 114.9 110.2 123.2 0.8 1.6 3.15 4.0 152.4 167.6 174.0 130 E1U 1RA LSF35 8.34
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Ozs)
Standard Option Grooved
Cone (X)
Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
20s16 M20 0.39 1/2″ 0.78 3/4″ 0.12 0.34 0.24 0.52 0.01 0.04 0.03 0.05 0.94 1.04 2.85 20S16 E1U 1RA PVC04 5.75
20S M20 0.39 1/2″ 0.78 3/4″ 0.24 0.46 0.37 0.63 0.01 0.04 0.03 0.05 0.94 1.04 2.76 20S E1U 1RA PVC04 5.29
20 M20 0.39 1/2″ 0.78 3/4″ 0.26 0.55 0.49 0.82 0.02 0.04 0.03 0.05 1.20 1.32 2.87 20 E1U 1RA PVC06 7.41
25S M25 0.39 3/4″ 0.8 1″ 0.44 0.78 0.55 0.87 0.02 0.05 0.05 0.06 1.48 1.63 3.50 25S E1U 1RA PVC09 11.64
25 M25 0.39 3/4″ 0.8 1″ 0.44 0.78 0.72 1.03 0.02 0.05 0.05 0.06 1.48 1.63 3.50 25 E1U 1RA PVC09 11.64
32 M32 0.39 1″ 0.98 1 1/4″ 0.67 1.03 0.93 1.33 0.02 0.05 0.06 0.08 1.81 1.99 3.39 32 E1U 1RA PVC11 15.17
40 M40 0.59 1 1/4″ 1.01 1 1/2″ 0.87 1.26 1.10 1.59 0.02 0.06 0.06 0.08 2.17 2.38 3.54 40 E1U 1RA PVC15 21.87
50S M50 0.59 1 1/2″ 1.03 2″ 1.16 1.50 1.39 1.84 0.02 0.06 0.08 0.10 2.36 2.60 3.58 50S E1U 1RA PVC18 26.46
50 M50 0.59 2″ 1.06 2 1/2″ 1.40 1.73 1.59 2.09 0.02 0.06 0.08 0.10 2.76 3.04 3.74 50 E1U 1RA PVC21 33.51
63S M63 0.59 2″ 1.06 2 1/2″ 1.58 1.96 1.8 2.34 0.02 0.06 0.08 0.10 2.95 3.25 4.02 63S E1U 1RA PVC23 47.27
63 M63 0.59 2 1/2″ 1.57 3″ 1.86 2.20 2.15 2.59 0.02 0.06 0.08 0.10 3.15 3.46 4.09 63 E1U 1RA PVC25 47.27
75S M75 0.59 2 1/2″ 1.57 3″ 2.08 2.44 2.32 2.83 0.02 0.06 0.08 0.10 3.54 3.90 4.53 75S E1U 1RA PVC28 74.43
75 M75 0.59 3″ 1.63 3 1/2″ 2.33 2.67 2.63 3.09 0.02 0.06 0.1 0.12 3.94 4.33 4.61 75 E1U 1RA PVC30 85.36
90 M90 0.94 3 1/2″ 1.69 4″ 2.62 3.09 3.00 3.56 0.03 0.06 0.12 0.16 4.50 4.94 5.79 90 E1U 1RA PVC32 148.5
100 M100 0.94 4″ 1.73 5″ 2.99 3.58 3.39 3.99 0.03 0.06 0.12 0.16 4.84 5.33 5.51 100 E1U 1RA LSF33 156.97
115 M115 0.94 4″ 1.73 5″ 3.39 3.85 4.00 4.34 0.03 0.06 0.12 0.16 5.25 5.78 6.38 115 E1U 1RA LSF34 218.35
130 M130 0.94 5″ 1.84 6″ 3.82 4.52 4.34 4.85 0.03 0.06 0.12 0.16 6.00 6.60 6.85 130 E1U 1RA LSF35 294.19
Dimensions displayed in inches unless otherwise stated