Products > E1W CIEL Cable Gland
industrial / general purpose double seal cast integral earth lug for all types of steel & aluminium wire armoured cables

E1W CIEL Cable Gland
industrial / general purpose double seal cast integral earth lug for all types of steel & aluminium wire armoured cables

Double Seal Industrial Cast Integral Earth Lug Cable Gland

• External earth connection
• IThird party short circuit tested
• Metal-to-metal armour clamping
• Direct & remote installation
• Permanently crimped, low impedance earth termination
• Secure against self-loosening
• Displacement type inner seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• Deluge protection option
• -60°C to +130°C
• EMC tested

Note: The Symmetrical Fault Current (kA) rating for 1 second applicable to the Cast Integral Earth Lug featured in the E1W CIEL products are as follows:
• 26.0 kA for Cable Gland sizes up to 40
• 43.0 kA for Cable Gland sizes 50S and above.

For under / oversized armour wires

For all types of Steel & Aluminium Wire Armoured Cables

Description

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category C
GOST R Certificate POCC.GB.35.H00102
Marine Approvals LRS: 01/00171 (E1), ABS: 16-LD1472056-PDA
Ingress Protection Rating ** IP66 as standard (IP67, IP68 available upon request)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium
Seal Material CMP Thermoset Rubber
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable Bedding Diameter “A” Overall Cable Diameter “B” Armour Range Across Flats “D” Across Corners “D” Protrusion Length “F” Nominal Radius Dimension CIEL Earth Bolt Size Earth Fault Current Rating (kA) Combined Ordering Reference (*Brass Metric) Cable Gland Weight (Kgs)
Standard
Metric Thread Length (Metric) “E” NPT Thread Length (Metric) “E” NPT Min Max Min Max min Max Max Max “H” “G” Size Type Ordering Suffix
20S M20 10.0 ½” 19.9 ¾” 6.1 11.6 9.5 15.9 0.8 1.25 24.0 26.4 70.0 28.6 38.6 M8 26.0 20S E1WC 1RA 0.195
20 M20 10.0 ½” 19.9 ¾” 6.5 13.9 12.5 20.9 0.8 1.25 30.5 33.6 73.0 31.8 41.8 M8 26.0 20 E1WC 1RA 0.276
25S M25 10.0 ¾” 20.2 1″ 11.1 19.9 14.0 22.0 1.25 1.6 37.5 41.3 89.0 38.1 50.8 M8 26.0 25S E1WC 1RA 0.438
25 M25 10.0 ¾” 20.2 1″ 11.1 19.9 18.2 26.2 1.25 1.6 37.5 41.3 89.0 38.1 50.8 M8 26.0 25 E1WC 1RA 0.435
32 M32 10.0 1″ 25.0 1 ¼” 17.0 26.2 23.7 33.9 1.6 2.0 46.0 50.6 86.0 41.3 54.0 M10 26.0 32 E1WC 1RA 0.506
40 M40 15.0 1 ¼” 25.6 1 ½” 22.0 32.1 27.9 40.4 1.6 2.0 55.0 60.5 90.0 50.8 68.3 M12 26.0 40 E1WC 1RA 0.802
50S M50 15.0 1 ½” 26.1 2″ 29.5 38.1 35.2 46.7 2.0 2.5 60.0 66.0 91.0 57.2 74.6 M12 43.0 50S E1WC 1RA 0.883
50 M50 15.0 2″ 26.9 2 ½” 35.6 44.0 40.4 53.0 2.0 2.5 70.1 77.1 95.0 60.3 79.4 M12 43.0 50 E1WC 1RA 1.038
63S M63 15.0 2″ 26.9 2 ½” 40.1 49.9 45.6 59.4 2.0 2.5 75.0 82.5 102.0 70.0 90.5 M12 43.0 63S E1WC 1RA 1.636
63 M63 15.0 2 ½” 39.9 3″ 47.2 55.9 54.6 65.8 2.0 2.5 80.0 88.0 104.0 70.0 90.5 M12 43.0 63 E1WC 1RA 1.597
75S M75 15.0 2 ½” 39.9 3″ 52.8 61.9 59.0 72.0 2.0 2.5 90.0 99.0 115.0 76.2 98.5 M12 43.0 75S E1WC 1RA 2.31
75 M75 15.0 3″ 41.5 3 ½” 59.1 67.9 66.7 78.4 2.5 3.0 100.0 110.0 117.0 82.6 108.0 M12 43.0 75 E1WC 1RA 2.717
90 M90 24.0 3 ½” 42.8 4″ 66.6 78.6 76.2 90.3 3.15 4.0 114.3 125.7 147.0 95.3 127.1 M12 43.0 90 E1WC 1RA 4.417
100 M100 24.0 4″ 44.0 5″ 76.0 90.9 86.1 101.4 3.15 4.0 123.0 135.3 140.0 102.0 133.8 M12 43.0 100 E1WC 1RA 4.82
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 3.15 4.0 133.4 146.7 162.0 95.3 127.1 M12 43.0 115 E1WC 1RA 6.191
130 M130 24.0 5″ 46.8 6″ 97.0 114.9 110.2 123.2 3.15 4.0 152.4 167.6 177.0 102.0 133.8 M12 43.0 130 E1WC 1RA 8.539
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable Bedding Diameter “A” Overall Cable Diameter “B” Armour Range Across Flats “D” Across Corners “D” Protrusion Length “F” Nominal Radius Dimension CIEL Earth Bolt Size Earth Fault Current Rating (kA) Combined Ordering Reference (*Brass Metric) Cable Gland Weight (Kgs)
Standard
Metric Thread Length (Metric) “E” NPT Thread Length (Metric) “E” NPT Min Max Min Max min Max Max Max “H” “G” Size Type Ordering Suffix
20S M20 0.39 ½” 0.78 ¾” 0.24 0.46 0.37 0.63 0.03 0.05 0.94 1.04 2.76 1.13 1.52 M8 26.0 20S E1WC 1RA 6.88
20 M20 0.39 ½” 0.78 ¾” 0.26 0.55 0.49 0.82 0.03 0.05 1.20 1.32 2.87 1.25 1.65 M8 26.0 20 E1WC 1RA 9.74
25S M25 0.39 ¾” 0.80 1″ 0.44 0.78 0.55 0.87 0.05 0.06 1.48 1.63 3.50 1.50 2.00 M8 26.0 25S E1WC 1RA 15.45
25 M25 0.39 ¾” 0.80 1″ 0.44 0.78 0.72 1.03 0.05 0.06 1.48 1.63 3.50 1.50 2.00 M8 26.0 25 E1WC 1RA 15.34
32 M32 0.39 1″ 0.98 1 ¼” 0.67 1.03 0.93 1.33 0.06 0.08 1.81 1.99 3.39 1.63 2.13 M10 26.0 32 E1WC 1RA 17.85
40 M40 0.59 1 ¼” 1.01 1 ½” 0.87 1.26 1.10 1.59 0.06 0.08 2.17 2.38 3.54 2.00 2.69 M12 26.0 40 E1WC 1RA 28.29
50S M50 0.59 1 ½” 1.03 2″ 1.16 1.50 1.39 1.84 0.08 0.10 2.36 2.60 3.58 2.25 2.94 M12 43.0 50S E1WC 1RA 31.15
50 M50 0.59 2″ 1.06 2 ½” 1.40 1.73 1.59 2.09 0.08 0.10 2.76 3.04 3.74 2.37 3.13 M12 43.0 50 E1WC 1RA 36.61
63S M63 0.59 2″ 1.06 2 ½” 1.58 1.96 1.80 2.34 0.08 0.10 2.95 3.25 4.02 2.76 3.56 M12 43.0 63S E1WC 1RA 57.71
63 M63 0.59 2 ½” 1.57 3″ 1.86 2.20 2.15 2.59 0.08 0.10 3.15 3.46 4.09 2.76 3.56 M12 43.0 63 E1WC 1RA 56.33
75S M75 0.59 2 ½” 1.57 3″ 2.08 2.44 2.32 2.83 0.08 0.10 3.54 3.90 4.53 3.00 3.88 M12 43.0 75S E1WC 1RA 81.48
75 M75 0.59 3″ 1.63 3 ½” 2.33 2.67 2.63 3.09 0.10 0.12 3.94 4.33 4.61 3.25 4.25 M12 43.0 75 E1WC 1RA 95.84
90 M90 0.94 3 ½” 1.69 4″ 2.62 3.09 3.00 3.56 0.12 0.16 4.50 4.95 5.79 3.75 5.00 M12 43.0 90 E1WC 1RA 155.81
100 M100 0.94 4″ 1.73 5″ 2.99 3.58 3.39 3.99 0.12 0.16 4.84 5.33 5.51 4.02 5.27 M12 43.0 100 E1WC 1RA 170.02
115 M115 0.94 4″ 1.73 5″ 3.39 3.85 4.00 4.34 0.12 0.16 5.25 5.78 6.38 3.75 5.00 M12 43.0 115 E1WC 1RA 218.38
130 M130 0.94 5″ 1.84 6″ 3.82 4.52 4.34 4.85 0.12 0.16 6.00 6.60 6.97 4.02 5.27 M12 43.0 130 E1WC 1RA 301.20
Dimensions displayed in millimeters unless otherwise stated

Download Spec Sheet

Download

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category C
GOST R Certificate POCC.GB.35.H00102
Marine Approvals LRS: 01/00171 (E1), ABS: 16-LD1472056-PDA
Ingress Protection Rating ** IP66 as standard (IP67, IP68 available upon request)
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium
Seal Material CMP Thermoset Rubber
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA)
Armour Clamping Detachable Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique CMP Inner Displacement Seal & Unique CMP ‘LRS’ TM Outer Load Retention Seal
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable Bedding Diameter “A” Overall Cable Diameter “B” Armour Range Across Flats “D” Across Corners “D” Protrusion Length “F” Nominal Radius Dimension CIEL Earth Bolt Size Earth Fault Current Rating (kA) Combined Ordering Reference (*Brass Metric) Cable Gland Weight (Kgs)
Standard
Metric Thread Length (Metric) “E” NPT Thread Length (Metric) “E” NPT Min Max Min Max min Max Max Max “H” “G” Size Type Ordering Suffix
20S M20 10.0 ½” 19.9 ¾” 6.1 11.6 9.5 15.9 0.8 1.25 24.0 26.4 70.0 28.6 38.6 M8 26.0 20S E1WC 1RA 0.195
20 M20 10.0 ½” 19.9 ¾” 6.5 13.9 12.5 20.9 0.8 1.25 30.5 33.6 73.0 31.8 41.8 M8 26.0 20 E1WC 1RA 0.276
25S M25 10.0 ¾” 20.2 1″ 11.1 19.9 14.0 22.0 1.25 1.6 37.5 41.3 89.0 38.1 50.8 M8 26.0 25S E1WC 1RA 0.438
25 M25 10.0 ¾” 20.2 1″ 11.1 19.9 18.2 26.2 1.25 1.6 37.5 41.3 89.0 38.1 50.8 M8 26.0 25 E1WC 1RA 0.435
32 M32 10.0 1″ 25.0 1 ¼” 17.0 26.2 23.7 33.9 1.6 2.0 46.0 50.6 86.0 41.3 54.0 M10 26.0 32 E1WC 1RA 0.506
40 M40 15.0 1 ¼” 25.6 1 ½” 22.0 32.1 27.9 40.4 1.6 2.0 55.0 60.5 90.0 50.8 68.3 M12 26.0 40 E1WC 1RA 0.802
50S M50 15.0 1 ½” 26.1 2″ 29.5 38.1 35.2 46.7 2.0 2.5 60.0 66.0 91.0 57.2 74.6 M12 43.0 50S E1WC 1RA 0.883
50 M50 15.0 2″ 26.9 2 ½” 35.6 44.0 40.4 53.0 2.0 2.5 70.1 77.1 95.0 60.3 79.4 M12 43.0 50 E1WC 1RA 1.038
63S M63 15.0 2″ 26.9 2 ½” 40.1 49.9 45.6 59.4 2.0 2.5 75.0 82.5 102.0 70.0 90.5 M12 43.0 63S E1WC 1RA 1.636
63 M63 15.0 2 ½” 39.9 3″ 47.2 55.9 54.6 65.8 2.0 2.5 80.0 88.0 104.0 70.0 90.5 M12 43.0 63 E1WC 1RA 1.597
75S M75 15.0 2 ½” 39.9 3″ 52.8 61.9 59.0 72.0 2.0 2.5 90.0 99.0 115.0 76.2 98.5 M12 43.0 75S E1WC 1RA 2.31
75 M75 15.0 3″ 41.5 3 ½” 59.1 67.9 66.7 78.4 2.5 3.0 100.0 110.0 117.0 82.6 108.0 M12 43.0 75 E1WC 1RA 2.717
90 M90 24.0 3 ½” 42.8 4″ 66.6 78.6 76.2 90.3 3.15 4.0 114.3 125.7 147.0 95.3 127.1 M12 43.0 90 E1WC 1RA 4.417
100 M100 24.0 4″ 44.0 5″ 76.0 90.9 86.1 101.4 3.15 4.0 123.0 135.3 140.0 102.0 133.8 M12 43.0 100 E1WC 1RA 4.82
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 3.15 4.0 133.4 146.7 162.0 95.3 127.1 M12 43.0 115 E1WC 1RA 6.191
130 M130 24.0 5″ 46.8 6″ 97.0 114.9 110.2 123.2 3.15 4.0 152.4 167.6 177.0 102.0 133.8 M12 43.0 130 E1WC 1RA 8.539
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable Bedding Diameter “A” Overall Cable Diameter “B” Armour Range Across Flats “D” Across Corners “D” Protrusion Length “F” Nominal Radius Dimension CIEL Earth Bolt Size Earth Fault Current Rating (kA) Combined Ordering Reference (*Brass Metric) Cable Gland Weight (Kgs)
Standard
Metric Thread Length (Metric) “E” NPT Thread Length (Metric) “E” NPT Min Max Min Max min Max Max Max “H” “G” Size Type Ordering Suffix
20S M20 0.39 ½” 0.78 ¾” 0.24 0.46 0.37 0.63 0.03 0.05 0.94 1.04 2.76 1.13 1.52 M8 26.0 20S E1WC 1RA 6.88
20 M20 0.39 ½” 0.78 ¾” 0.26 0.55 0.49 0.82 0.03 0.05 1.20 1.32 2.87 1.25 1.65 M8 26.0 20 E1WC 1RA 9.74
25S M25 0.39 ¾” 0.80 1″ 0.44 0.78 0.55 0.87 0.05 0.06 1.48 1.63 3.50 1.50 2.00 M8 26.0 25S E1WC 1RA 15.45
25 M25 0.39 ¾” 0.80 1″ 0.44 0.78 0.72 1.03 0.05 0.06 1.48 1.63 3.50 1.50 2.00 M8 26.0 25 E1WC 1RA 15.34
32 M32 0.39 1″ 0.98 1 ¼” 0.67 1.03 0.93 1.33 0.06 0.08 1.81 1.99 3.39 1.63 2.13 M10 26.0 32 E1WC 1RA 17.85
40 M40 0.59 1 ¼” 1.01 1 ½” 0.87 1.26 1.10 1.59 0.06 0.08 2.17 2.38 3.54 2.00 2.69 M12 26.0 40 E1WC 1RA 28.29
50S M50 0.59 1 ½” 1.03 2″ 1.16 1.50 1.39 1.84 0.08 0.10 2.36 2.60 3.58 2.25 2.94 M12 43.0 50S E1WC 1RA 31.15
50 M50 0.59 2″ 1.06 2 ½” 1.40 1.73 1.59 2.09 0.08 0.10 2.76 3.04 3.74 2.37 3.13 M12 43.0 50 E1WC 1RA 36.61
63S M63 0.59 2″ 1.06 2 ½” 1.58 1.96 1.80 2.34 0.08 0.10 2.95 3.25 4.02 2.76 3.56 M12 43.0 63S E1WC 1RA 57.71
63 M63 0.59 2 ½” 1.57 3″ 1.86 2.20 2.15 2.59 0.08 0.10 3.15 3.46 4.09 2.76 3.56 M12 43.0 63 E1WC 1RA 56.33
75S M75 0.59 2 ½” 1.57 3″ 2.08 2.44 2.32 2.83 0.08 0.10 3.54 3.90 4.53 3.00 3.88 M12 43.0 75S E1WC 1RA 81.48
75 M75 0.59 3″ 1.63 3 ½” 2.33 2.67 2.63 3.09 0.10 0.12 3.94 4.33 4.61 3.25 4.25 M12 43.0 75 E1WC 1RA 95.84
90 M90 0.94 3 ½” 1.69 4″ 2.62 3.09 3.00 3.56 0.12 0.16 4.50 4.95 5.79 3.75 5.00 M12 43.0 90 E1WC 1RA 155.81
100 M100 0.94 4″ 1.73 5″ 2.99 3.58 3.39 3.99 0.12 0.16 4.84 5.33 5.51 4.02 5.27 M12 43.0 100 E1WC 1RA 170.02
115 M115 0.94 4″ 1.73 5″ 3.39 3.85 4.00 4.34 0.12 0.16 5.25 5.78 6.38 3.75 5.00 M12 43.0 115 E1WC 1RA 218.38
130 M130 0.94 5″ 1.84 6″ 3.82 4.52 4.34 4.85 0.12 0.16 6.00 6.60 6.97 4.02 5.27 M12 43.0 130 E1WC 1RA 301.20
Dimensions displayed in millimeters unless otherwise stated