1225 North Loop West #705 HOUSTON, TX 77008-1768
+1 832.358.1177
+1 888.453-0033
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

Standard Duty, 1-bolt, Fire Performance Cable Cleat
Vendor: CMP Products


The CMP Products Helios Standard Duty, One Bolt, High Temperature Fire Rated Stainless Steel single cable cleat is a fabricated metallic cleat which has been designed, constructed, and tested in accordance with the International Standard ‘Cable Cleats for Electrical Installations’ (IEC 61914).

These Fire Rated cable cleats can be used with fire performance cables to ensure the safe retention and securing of single cables in the event of a wiring system being affected by fire. These fire resisting supports help to maintain the electrical systems integrity for any critical circuits during an emergency situation to enable safe evacuation. The cable cleat is fabricated from Stainless Steel 316L making it suitable for both indoor and outdoor applications.

The Helios High Temperature Stainless Steel 316L cable cleat is available in eleven sizes suitable for cable diameters of 10mm up to 71mm. The cable cleat has an M10 clearance hole for securing it to a mounting surface.


Parallel Formation
One short circuit (6.4.3) 600mm fixed cleat centres 100mm cable centresTwo short circuit (6.4.4) 600mm fixed cleat centres 100mm cable centres
0.1 sec0.1 sec
60kA Peak60kA Peak
29kA RMS29kA RMS
BS 5839 ‘Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises’

States that “Methods of cable support should be non-combustible and such that circuit integrity will not be reduced below that afforded by the cable used, and should withstand a similar temperature and duration to that of the cable, while maintaining adequate support”

To adhere to this BSI standard fire rated Cable Cleats must be used to support the cable in the event of a fire


Type 6.1.1 Metallic SDHT -
One Bolt Fabricated High Temperature Stainless Steel Cable Cleat
Design Specification IEC 61914
Temperature for permanent application -60°C to +250°C IEC 61914
Fire Tested Surpasses requirements of BS5839 & B8491 (950°C) (Fire, shock & water)
Needle Flame Test Pass - 120 second flame application time
IEC 61914, IEC 60695-11-5
Lateral Load Test 480N IEC 61914
Axial Load Test 28N IEC 61914
Impact Resistance Pass - Very heavy IEC 61914
Material Stainless Steel 316L
Material Colour Silver / grey

Product Table


Helios Part No.Cable Ø range take (mm)Dimensions (mm)Weight (g)
WHDEFixing Hole Ø
FPC101310-13381940141 x M1088
FPC131613-16412240141 x M10103
FPC161916-19452540141 x M10114
FPC192319-23502940141 x M10128
FPC232723-27553340141 x M10143
FPC273227-32613840141 x M10165
FPC323832-38674440141 x M10182
FPC384638-46745240141 x M10210
FPC465146-51805740141 x M10233
FPC515751-57866340141 x M10252
FPC576557-65947140141 x M10274


Helios Part No.Cable Ø range take (in)Dimensions (in)Weight (oz)
WHDEFixing Hole Ø
FPC10130.39 - 0.511.500.751.570.61 x M103.10
FPC13160.51 - 0.631.610.871.570.61 x M103.63
FPC16190.63 - 0. 751.770.981.570.61 x M104.02
FPC19230.75 - 0.911.971.141.570.61 x M104.52
FPC23270.91 - x M105.04
FPC27321.06 - 1.262.401.501.570.61 x M105.82
FPC32381.26 - 1.502.641.731.570.61 x M106.42
FPC38461.50 - 1.812.912.051.570.61 x M107.41
FPC46511.81 - x M108.22
FPC51572.01 - 2.243.392.481.570.61 x M108.89
FPC57652.24 - 2.563.702.801.570.61 x M109.67