The Speedway Ladder Trapeze Hanger (LTH) provides
a dedicated and effective means of installing Speedway
cable ladder using a trapeze support arrangement.
Each Ladder Trapeze Hanger has fixing slots to accept the
Speedway External Flange Clamps (SW/EFC/#), Adaptable
Fixing Brackets (SW/AFB/#) and Hold Down Brackets (SW-/
HDB/#). The slot pattern allows the Adaptable Fixing Bracket
to be fitted either internally or externally on the cable ladder.
The Ladder Trapeze Hanger has 25 x 13.5 end slots to suit the
use of M10 or M12 threaded rod hangers. M10 threaded rod
hangers can also be utilised for securing the Speedway cable
ladder using Speedway External Flange Clamps (SW/EFC),
Adaptable Fixing Brackets (SW/AFB) and Hold Down Brackets
(SW/HDB). The loading table below gives the recommended
maximum load for each size of ladder trapeze hanger
when used with Speedway cable ladder (which should be
uniformly loaded to apply two equal point loads onto the
ladder trapeze hanger).