1225 North Loop West #705 HOUSTON, TX 77008-1768
+1 832.358.1177
+1 888.453-0033
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

Standard Duty Stainless Steel Hinged Cable Cleat
Vendor: CMP Products


CMP Patriot cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009 to ensure the securing and retention of cables, without sustaining damage to the cable(s).

The cable cleat has been designed and tested for short circuit conditions, within harsh environments. The Patriot cable cleats are available for trefoil application/formation for diameters of 19mm to 128mm in 23 sizes. The Patriot cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

The Patriot cable cleat has three M10 fixing clearance holes within one base allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The Patriot cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.

The Patriot cable cleats come with Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners as standard, helping to restrain the cable(s) within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cables occur, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classifed as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.

Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Trefoil Formation
One short circuit (6.4.3) 300mm fixed cleat centresTwo short circuits (6.4.4) 300mm fixed cleat centresOne short circuit (6.4.4) 600mm fixed cleat centresTwo short circuits (6.4.4) 600mm fixed cleat centres
0.1 sec 1 sec0.1 sec1 sec
135kA Peak80kA Peak108kA Peak75kA Peak
58.8kA RMS38.3kA RMS49.1kA RMS35.7kA RMS
300mm CAT 1 Patriot SDSS (0.1 sec)
Cable OD (mm)Peak kA
Type 6.1.3 Composite SDSS - Standard Duty Stainless Steel
Design Specification IEC 61914:2009
Temperature for permanent application -50°C to +60°C
IEC 61914:2009 clause 6.2
Needle Flame Test Pass - 120 second flame application time
IEC 61914:2009 clause 10.0, 10.1, IEC 60695-11-5
Lateral Load Test Refer to CMP Products, IEC 61914:2009 clause 9.3
Axial Load Test 0.6kN, IEC 61914:2009 clause 9.4
Impact Resistance Pass - Very heavy
IEC 61914:2009 clause 6.3, 6.3.5, 9.2
Material 316L Stainless Steel & Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free Liners
Standard liners are classified as Low Smoke & Fume (LSF),
Zero Halogen (LS0H) and Phosphorus Free

Product Table


Patriot Part No.Cable Ø Range Take (mm)Dimensions (mm)Weight (g)
WHDPFixing Hole Ø
SDSS01902419-2497. x M101 x M10312
SDSS02302823-2899. x M101 x M10318
SDSS02703227-32102. x M101 x M10324
SDSS03003530-35104.0101.054.025.02 x M101 x M10329
SDSS03303833-38106.0104.054.025.02 x M101 x M10336
SDSS03604236-42125.0109.054.050.02 x M101 x M10395
SDSS04004640-46128.0114.054.050.02 x M101 x M10403
SDSS04405044-50132.0116.054.050.02 x M101 x M10409
SDSS04805548-55136.0123.054.050.02 x M101 x M10420
SDSS05105851-58138.0129.054.050.02 x M101 x M10426
SDSS05506255-62158.0136.054.075.02 x M101 x M10482
SDSS05906659-66158.0144.054.075.02 x M101 x M10489
SDSS06307063-70159.0151.054.075.02 x M101 x M10496
SDSS06707467-74165.0159.054.075.02 x M101 x M10504
SDSS07107871-78172.0166.054.075.02 x M101 x M10513
SDSS07408274-82188.0174.054.075.02 x M101 x M10588
SDSS07708577-85189.0179.054.075.02 x M101 x M10593
SDSS08208882-88190.0185.054.075.02 x M101 x M10598
SDSS08809688-96202.0200.054.075.02 x M101 x M10614
SDSS09610396-103215.0213.054.075.02 x M101 x M10628
SDSS103111103-111234.0228.054.075.02 x M101 x M10710
SDSS111119111-119248.0243.054.075.02 x M101 x M10726
SDSS119128119-128265.0259.054.075.02 x M101 x M10744


Patriot Part No.Cable Ø Range Take (in.)Dimensions (in.)Weight (oz)
WHDPFixing Hole Ø
SDSS0190240.748 - 0.9453.8193.4252.1260.9842 x M101 x M1011.01
SDSS0230280.906 - 1.1023.8983.6222.1260.9842 x M101 x M1011.22
SDSS0270321.063 - 1.260 4.0163.8192.1260.9842 x M101 x M1011.43
SDSS0300351.181 - 1.3784.0943.9762.1260.9842 x M101 x M1011.61
SDSS0330381.299 - 1.4964.1734.0942.1260.9842 x M101 x M1011.85
SDSS0360421.417 - 1.6544.9214.2912.1261.9692 x M101 x M1013.93
SDSS0400461.575 - 1.8115.0394.4882.1261.9692 x M101 x M1014.22
SDSS0440501.732 - 1.9695.1974.5672.1261.9692 x M101 x M1014.43
SDSS0480551.890 - 2.1655.3544.8432.1261.9692 x M101 x M1014.82
SDSS0510582.008 - 2.2835.4335.0792.1261.9692 x M101 x M1015.03
SDSS0550622.165 - 2.4416.2205.3542.1262.9532 x M101 x M1017.00
SDSS0590662.323 - 2.5986.2205.6692.1262.9532 x M101 x M1017.25
SDSS0630702.480 - 2.7566.2605.9452.1262.9532 x M101 x M1017.50
SDSS0670742.638 - 2.9136.4966.2602.1262.9532 x M101 x M1017.78
SDSS0710782.795 - 3.0716.7726.5352.1262.9532 x M101 x M1018.10
SDSS0740822.913 - 3.2287.4026.8502.1262.9532 x M101 x M1020.74
SDSS0770853.031 - 3.3467.4417.0472.1262.9532 x M101 x M1020.92
SDSS0820883.228 - 3.4657.4807.2832.1262.9532 x M101 x M1021.09
SDSS0880963.465 - 3.8707.9537.8742.1262.9532 x M101 x M1021.66
SDSS0961033.780 - 4.0558.4658.3862.1262.9532 x M101 x M1022.15
SDSS1031114.055 - 4.3709.2138.9762.1262.9532 x M101 x M1025.04
SDSS1111194.370 - 4.6859.7649.5672.1262.9532 x M101 x M1025.61
SDSS1191284.685 - 5.03910.43310.1972.1262.9532 x M101 x M1026.24