1225 North Loop West #705 HOUSTON, TX 77008-1768
Houston
+1 832.358.1177
Calgary
+1 403.444.6948
Singapore
+65.6251.8820
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

PX2KREX
For all types of Armoured Cables
INQUIRE
Vendor: CMP Products

Description

Globally Approved, Explosive Atmosphere RapidEx Barrier Cable Gland

• RapidEx liquid pour sealing system
– Enhances reliability, reduces risk
– Reduces man hours
– Reduces cost
• Metal-to-metal armour clamping
• Direct & remote installation
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60?C to +85?C
• Class I Zone 1, 21 and Zone 2, 22 Class I Division 1 & 2 ABCD
• Globally marked, IECEx, ATEX & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

For under / oversized armour wires

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications * Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1072X, SIRA13ATEX4078X
Code of Protection II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
Compliance Standards EN 60079-0,1,7,15,31
IECEx Certificate IECEx SIR 13.0027X, IECEx SIM 14.0008X
Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
Compliance Standards IEC 60079-0,1,7,15,31
cCSAus Certificate 2288626
CSAus Code of Protection*** Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2 Groups E, F and G; Class III, Div. 1,
2; Type 4X: Oil Resistant II:
Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc,
Class I, Zone 20 AEx ta IIIC Da
cCSA Code of Protection*** Class I, Div. 1, 2 Groups A, B, C and D; Class II, Div. 1, 2
Groups E, F and G; Class III, Div. 1, 2; Type 4X: Oil Resistant II:
Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da
Compliance Standards CAN/CSA-C22.2 No 0,18,25,30,94,174, CAN/CSA-E60079-0,1,7,15,31 CAN/CSA-E61241-1-1 Part 1-1, ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0,1,7,15,31
EAC Certificate TC RU C-GB.AA87.B.00487
UkrSEPRO UA.TR.047.C.0644-15
CCOE / PESO (India) Certificate P333688
NEPSI Certificate GYJ13.1140X, GYJ13.1282X
INMETRO Certificate TÜV 12.2073X
RETIE Certificate 03866
Marine Approvals LRS: 01/00172, DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1BV
Ingress Protection Rating ** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer / RapidEx Resin Barrier
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Wire Braid Armour (e.g.
SWB), Screened Flexible (EMC) Wire Braid (e.g. CY / SY), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Strip Armour (e.g. ASA)
Armour Clamping Detachable Resin Tube / Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP ‘LRS’ Outer Seal (Load Retention Seal)
Sealing Area(s) Inner RapidEx Barrier Seal & Outer Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland SizeAvailable Entry Threads ?C? (Alternate Metric Thread Lengths Available)Number of CoresDiameter Over Conductors ?A?Cable Bedding Diameter ?G?Overall Cable Diameter ?B?Armour RangeAcross
Flats
?D?
Across
Corners
?D?
Protrusion
Length ?F?
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Kgs)
StandardOptionGrooved Cone (X)Stepped Cone (W)
MetricThread Length (Metric) ?E?NPTThread Length (NPT) ?E?NPTMaxMaxMaxMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M2015.0½?19.9¾"1111.711.76.113.10.31.00.81.2530.533.662.020S16PX2KREX1RAPVC060.24
20SM2015.0½?19.9¾"1111.711.79.515.90.31.00.81.2530.533.662.020SPX2KREX1RAPVC060.23
20M2015.0½?19.9¾"1112.612.912.520.90.41.00.81.2530.533.663.020PX2KREX1RAPVC060.24
25SM2515.0¾?20.21"2117.517.914.022.00.41.21.251.637.541.369.525SPX2KREX1RAPVC090.37
25M2515.0¾?20.21"2117.517.918.226.20.41.21.251.637.541.369.525PX2KREX1RAPVC090.37
32M3215.01?25.01 ¼"3823.623.923.733.90.41.21.62.046.050.675.032PX2KREX1RAPVC110.57
40M4015.01 ¼?25.61 ½"5930.030.327.940.40.41.61.62.055.060.575.040PX2KREX1RAPVC150.80
50SM5015.01 ½?26.12"8936.636.935.246.70.41.62.02.560.066.077.050SPX2KREX1RAPVC180.90
50M5015.02?26.92 ½"8941.041.340.453.00.61.62.02.570.077.077.050PX2KREX1RAPVC211.19
63SM6315.02?26.92 ½"11547.948.445.659.40.61.62.02.575.082.579.763SPX2KREX1RAPVC231.39
63M6315.02 ½?39.93"11553.754.054.665.80.61.62.02.580.088.080.363PX2KREX1RAPVC251.41
75SM7515.02 ½?39.93"14059.960.259.072.00.61.62.02.590.099.086.875SPX2KREX1RAPVC282.09
75M7515.03?41.53 ½"14064.264.266.778.40.61.62.53.0100.0110.088.375PX2KREX1RAPVC302.54
90M9024.03 ½?42.84"20075.375.676.290.30.81.63.154.0115.0126.5102.190PX2KREX1RAPVC323.71
100M10024.03 ½?42.84"20085.685.986.1101.40.81.63.154.0127.0139.7114.0100PX2KREX1RALSF334.81
Dimensions are displayed in millimeters unless otherwise stated

Imperial

Cable Gland SizeAvailable Entry Threads ?C? (Alternate Metric Thread Lengths Available)Number of CoresDiameter Over Conductors ?A?Cable Bedding Diameter ?G?Overall Cable Diameter ?B?Armour RangeAcross
Flats
?D?
Across
Corners
?D?
Protrusion
Length ?F?
Combined Ordering Reference
(*Brass Metric)
ShroudCable
Gland
Weight
(Ozs)
StandardOptionGrooved Cone (X)Stepped Cone (W)
MetricThread Length (Metric) ?E?NPTThread Length (NPT) ?E?NPTMaxMaxMaxMinMaxMinMaxMinMaxMaxMaxSizeTypeOrdering
Suffix
20S16M200.59½?0.78¾"110.460.460.240.520.010.040.030.051.201.322.4420S16PX2KREX1RAPVC068.47
20SM200.59½?0.78¾"110.460.460.370.630.010.040.030.051.201.322.4420SPX2KREX1RAPVC068.11
20M200.59½?0.78¾"110.500.510.490.820.020.040.030.051.201.322.4820PX2KREX1RAPVC068.47
25SM250.59¾?0.801"210.690.700.550.870.020.050.050.061.481.632.7425SPX2KREX1RAPVC0913.05
25M250.59¾?0.801"210.690.700.721.030.020.050.050.061.481.632.7425PX2KREX1RAPVC0913.05
32M320.591?0.981 ¼"380.930.940.931.330.020.050.060.081.811.992.9532PX2KREX1RAPVC1120.11
40M400.591 ¼?1.011 ½"591.181.191.101.590.020.060.060.082.172.382.9540PX2KREX1RAPVC1528.22
50SM500.591 ½?1.032"891.441.451.391.840.020.060.080.102.362.603.0350SPX2KREX1RAPVC1831.75
50M500.592?1.062 ½"891.611.631.592.090.020.060.080.102.763.033.0350PX2KREX1RAPVC2141.98
63SM630.592?1.062 ½"1151.891.911.802.340.020.060.080.102.953.253.1463SPX2KREX1RAPVC2349.03
63M630.592 ½?1.573"1152.112.132.152.590.020.060.080.103.153.463.1663PX2KREX1RAPVC2549.74
75SM750.592 ½?1.573"1402.362.372.322.830.020.060.080.103.543.903.4275SPX2KREX1RAPVC2873.72
75M750.593?1.633 ½"1402.532.532.633.090.020.060.100.123.944.333.4875PX2KREX1RAPVC3089.60
90M900.943 ½?1.694"2002.962.983.003.560.030.060.120.164.534.984.0290PX2KREX1RAPVC32130.87
100M1000.943 ½?1.694"2003.373.383.393.990.030.060.120.165.005.504.49100PX2KREX1RALSF33169.67
Dimensions are displayed in inches unless otherwise stated