1225 North Loop West #705 HOUSTON, TX 77008-1768
+1 832.358.1177
+1 888.453-0033
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

RFOU P1/P8 Power and Control 0.6/1KV Flame Retardant
Download Spec Sheet
RFOU power cable, MUD resistant to NEK606

Halogen Free 

Attributes: Armoured Sheathed Flame Retardant Low Smoke 
Vendor:  Eutex International

Control Panel Heat Dissipation Calculator
Cable Sizing / Maximum Distance Calculator


Conductors: Tinned annealed stranded copper

Core identification: Single core: off-white 2 core: off-white & black, 3 core: off-white, black & red, 4 core: off-white, black, red & blue.

Including green / yellow core options. 

Insulation: Halogen free EPR (Ethylene Propylene Rubber),

Screen: TCWB (Tinned copper wire braid)

Sheath/Jacket: Type: SHF, thermoset dual compound, halogen free and mud resistant

Sheath colours: Black 

Voltage: 600/1000v

Operating temperature: Maximum 90°C, minimium bending -40°C

Cold Bend/Impact: CSA 22.2 NO. 0.3 (-40°C)


  • IEC60092-353: electrical installation in ships, power cables
  • NEK606: cables for offshore installation halogen-free or mud-resistant
  • IEC60092.375: shipboard telecommunications cable
  • IEC60331: fire resistant
  • IEC60332: flame retardant
  • IEC61031-1.2: smoke denisty
  • IEC60754-1: halogen free properties
  • IEC60228: electical conductor

Applications: Mud resistant cables suitable for control, lighting and power systems

Type Approvals: ABS, DNV Lloyd’s Register of Shipping

Product Table

Classification Information

Classification Code Construction Detail
Conductor Stranded tinned annealed copper wires as per IEC 60228, Class 2
Insulation R Halogen free EPR compound as per IEC 60092-351
Cabling - Insulated cores shall be cabled.
- Flame retardant and non-hygroscopic fillers may be used.
- Suitable tape(s) may be applied on the cabled core.
Inner covering F Flame retardant halogen free thermoset compound
Armor O (B) - Braid of tinned annealed copper wire(O) / bronze wire(B)
-Coverage density : Min. 90%
- A suitable separator tape(s) may be applied under/over the armor
Sheath U - SHF2 or SHF Mud as per IEC 60092-359
- Outer sheath color : Black

Core Identification

No. of Cores Without Earth Core With Earth Core
1C Off-white
2C Black, White
3C / 2C+E Black, White, Red Black, White, G/Y
4C / 3C+E Black, White, Red, Blue Black, White, Red, G/Y
5C / 4C+E Black No. on white insulation Black, White, Red, Blue, G/Y
6C and above Black No. on white insulation Black No. on white insulation, G/Y