1225 North Loop West #705 HOUSTON, TX 77008-1768
+1 832.358.1177
+1 888.453-0033
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

Heavy Duty, 1-bolt, Fire Performance Cable Cleat
Vendor: CMP Products


The CMP Products Solace Heavy Duty, One Bolt, High Temperature Fire Rated Stainless Steel single cable cleat is a cast metallic cleat which has been designed, constructed, and tested in accordance with the International Standard ‘Cable Cleats for Electrical Installations’ (IEC 61914).

These Fire Rated cable cleats can be used with fire performance cables to ensure the safe retention and securing of single cables in the event of a wiring system being affected by fire. These fire resisting supports help to maintain the electrical systems integrity for any critical circuits during an emergency situation to enable safe evacuation. The cable cleat is manufactured from Stainless Steel 316L making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral movement.

The Solace One Bolt High Temperature Stainless Steel cable cleat is available in twelve sizes suitable for cable diameters of 10mm up to 71mm. The cable cleat has an M10 clearance hole for securing it to a mounting surface.


Parallel Formation
One short circuit (6.4.3) 600mm fixed cleat centres 100mm cable centresTwo short circuit (6.4.4) 600mm fixed cleat centres 100mm cable centres
0.1 sec0.1 sec
100kA Peak100kA Peak
47.6kA RMS47.6kA RMS
BS 5839 ‘Fire detection and fire alarm systems for buildings. Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises’

States that “Methods of cable support should be non-combustible and such that circuit integrity will not be reduced below that afforded by the cable used, and should withstand a similar temperature and duration to that of the cable, while maintaining adequate support”

To adhere to this BSI standard fire rated Cable Cleats must be used to support the cable in the event of a fire
Type 6.1.1 Metallic 1BCHT - One Bolt High Temperature Stainless Steel Cable Cleat
Design Specification IEC 61914
Temperature for permanent application -60°C to +250°C IEC 61914
Fire Tested Surpasses requirements of BS5839 & B8491 (950°C) (Fire, shock & water)
Needle Flame Test Pass - 120 second flame application time
IEC 61914, IEC 60695-11-5
Lateral Load Test 15kN - 23kN, IEC 61914
Axial Load Test 1kN IEC 61914
Impact Resistance Pass - Very Heavy IEC 61914
Material Stainless Steel 316L
Material Colour Silver / grey

Product Table


Solace Part No.Cable ø range take (mm)Dimensions (mm)Weight (g)
WHDEFixing Hole ø
1BC1013HT10-13413446131 x M10164
1BC1316HT13-16443746131 x M10185
1BC1619HT16-19474046131 x M10215
1BC1923HT19-23514446131 x M10237
1BC2327HT23-27554846131 x M10277
1BC2732HT27-32615646131 x M10341
1BC3238HT32-38676246131 x M10387
1BC3845HT38-45757346131 x M10486
1BC4551HT45-51817646131 x M10541
1BC5158HT51-58868346131 x M10617
1BC5865HT58-65949046131 x M10697
1BC6571HT65-711019746131 x M10763
Dimensions displayed in millimeters unless otherwise stated


Solace Part No.Cable ø range take (in.)Dimensions (in.)Weight (ozs)
WHDEFixing Hole ø
1BC1013HT0.39 - 0.511.611.341.810.511 x M105.78
1BC1316HT0.51 - 0.631.731.461.810.511 x M106.53
1BC1619HT0.63 - 0.751.851.571.810.511 x M107.58
1BC1923HT0.75 - 0.912.011.731.810.511 x M108.36
1BC2327HT0.91 - x M109.77
1BC2732HT1.06 - 1.262.402.201.810.511 x M1012.03
1BC3238HT1.26 - 1.502.642.441.810.511 x M1013.65
1BC3845HT1.50 - 1.772.952.871.810.511 x M1017.14
1BC4551HT1.77 - x M1019.08
1BC5158HT2.01 - 2.283.393.271.810.511 x M1021.76
1BC5865HT2.28 - 2.563.703.541.810.511 x M1024.59
1BC6571HT2.56 - 2.803.983.821.810.511 x M1026.91
Dimensions displayed in inches unless otherwise stated