1225 North Loop West #705 HOUSTON, TX 77008-1768
+1 832.358.1177
+1 888.453-0033
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

Heavy Duty Stainless Steel Hinged Cable Cleat
Vendor: CMP Products


The CMP Products Sovereign cable cleat range consists of metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The Sovereign cable cleat has been designed and tested for high short circuit conditions on cables held in trefoil application / formation, to ensure the securing and retention of cables without damage.

The Sovereign cable cleat is available for trefoil application / formation for diameters of 19mm to 128mm in 23 sizes. The cable cleat is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.

The Sovereign cable cleat has one M12 and two M10 fixing clearance holes within its base, allowing versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The Sovereign cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.

Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners are standard helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cables in the event of short circuit fault conditions.

Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Trefoil Formation
One short circuit (6.4.3) 300mm fixed cleat centresTwo short circuits (6.4.4) 300mm fixed cleat centresOne short circuit (6.4.3) 600mm fixed cleat centresTwo short circuits (6.4.4) 600mm fixed cleat centres
0.1 sec1 sec0.1 sec1 sec
190kA Peak96kA Peak150kA Peak80kA Peak
87.7kA RMS46.1kA RMS68.2 RMS38.1kA RMS
300mm CAT 1 Sovereign HDSS (0.1 sec)
Cable OD (mm)Peak kA
Type 6.1.3 Composite HDSS - Heavy Duty Stainless Steel
Design Specification IEC 61914:2009
Temperature for permanent application -50°C to +60°C
IEC 61914:2009 clause 6.2
Needle Flame Test Pass - 120 second flame application time
IEC 61914:2009 clause 10.0, 10.1, IEC 60695-11-5
Lateral Load Test Refer to CMP Products, IEC 61914:2009 clause 9.3
Axial Load Test 0.7kN, IEC 61914:2009 clause 9.4
Impact Resistance Pass - Very heavy
IEC 61914:2009 clause 6.3, 6.3.5, 9.2
Material 316L Stainless Steel and Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free Liners

Product Table


Sovereign Part No.Cable Ø Range Take (mm)Dimensions (mm)Weight (g)
WHDPFixing Hole Ø
HDSS01902319-23100. x M101 x M12417
HDSS02302823-28104. x M101 x M12450
HDSS02703227-32106. x M101 x M12465
HDSS03003530-35108.0103.054.025.02 x M101 x M12473
HDSS03303833-38110.0107.054.025.02 x M101 x M12485
HDSS03604236-42132.0108.054.050.02 x M101 x M12570
HDSS04004640-46134.0113.054.050.02 x M101 x M12581
HDSS04405044-50136.0121.054.050.02 x M101 x M12594
HDSS04805548-55138.0127.054.050.02 x M101 x M12616
HDSS05105851-58140.0130.054.075.02 x M101 x M12627
HDSS05506255-62157.0138.054.075.02 x M101 x M12704
HDSS05906659-66157.0145.054.075.02 x M101 x M12718
HDSS06307063-70160.0152.054.075.02 x M101 x M12733
HDSS06707467-74163.0160.054.075.02 x M101 x M12748
HDSS07107871-78168.0167.054.075.02 x M101 x M12764
HDSS07408274-82190.0175.054.075.02 x M101 x M12863
HDSS07708577-85192.0180.054.075.02 x M101 x M12873
HDSS08208882-88193.0186.054.075.02 x M101 x M12883
HDSS08809688-96202.0201.054.075.02 x M101 x M12914
HDSS09610396-103214.0215.054.075.02 x M101 x M12942
HDSS103111103-111237.0229.054.075.02 x M101 x M121055
HDSS111119111-119248.0244.054.075.02 x M101 x M121086
HDSS119128119-128265.0260.054.075.02 x M101 x M121122


Sovereign Part No.Cable Ø Range Take (in.)Dimensions (in.)Weight (oz)
WHDPFixing Hole Ø
HDSS0190230.748 - 0.9063.9373.4252.1260.9842 x M101 x M1214.71
HDSS0230280.906 - 1.1024.0943.4652.1260.9842 x M101 x M1215.87
HDSS0270321.063 - 1.2604.1733.8192.1260.9842 x M101 x M1216.40
HDSS0300351.181 - 1.378 4.2524.0552.1260.9842 x M101 x M1216.68
HDSS0330381.299 - 1.4964.3314.2132.1260.9842 x M101 x M1217.11
HDSS0360421.417 - 1.6545.1974.2522.1261.9692 x M101 x M1220.11
HDSS0400461.575 - 1.8115.2764.4492.1261.9692 x M101 x M1220.49
HDSS0440501.732 - 1.9695.3544.7642.1261.9692 x M101 x M1220.95
HDSS0480551.890 - 2.1655.4335.0002.1261.9692 x M101 x M1221.73
HDSS0510582.008 - 2.2835.5125.1182.1262.9532 x M101 x M1222.12
HDSS0550622.165 - 2.4416.1815.4332.1262.9532 x M101 x M1224.83
HDSS0590662.323 - 2.5986.1815.7092.1262.9532 x M101 x M1225.33
HDSS0630702.480 - 2.7566.2995.9842.1262.9532 x M101 x M1225.86
HDSS0670742.638 - 2.9136.4176.2992.1262.9532 x M101 x M1226.38
HDSS0710782.795 - 3.0716.6146.5752.1262.9532 x M101 x M1226.95
HDSS0740822.913 - 3.2287.4806.8902.1262.9532 x M101 x M1230.44
HDSS0770853.031 - 3.3467.5597.0872.1262.9532 x M101 x M1230.79
HDSS0820883.228 - 3.4657.5987.3232.1262.9532 x M101 x M1231.15
HDSS0880963.465 - 3.7807.9537.9132.1262.9532 x M101 x M1232.24
HDSS0961033.780 - 4.0558.4258.4652.1262.9532 x M101 x M1233.23
HDSS1031114.055 - 4.3709.3319.0162.1262.9532 x M101 x M1237.21
HDSS1111194.370 - 4.6859.7649.6062.1262.9532 x M101 x M1238.31
HDSS1191284.685 - 5.03910.43310.2362.1262.9532 x M101 x M1239.58