Vantrunk tray arms (TCA) are suitable for supporting cable
tray from channel or flat surfaces. Available for cable tray of
widths from 50mm to 900mm, the Vantrunk tray arms have
M10 clearance holes for fixing to the supports and M6
clearance holes to allow for fixing through the bed of the
Vantrunk tray cantilever arms have one fixing hole for arm
lengths up to & including 100mm, and two fixing holes
for arm lengths of 150mm and above. The Vantrunk tray
cantilever arms are suitable for use with the full range of
Vantrunk cable trays.
The loading table below gives the recommended maximum
load for each size of trapeze hanger bracket when used with
Vantrunk cable tray and with a uniformly distributed load
(UDL) onto the tray cantilever arm.