1225 North Loop West #705 HOUSTON, TX 77008-1768
+1 832.358.1177
+1 888.453-0033
Main Menu

What are you inquiring about? *

Full Name *

Email Address *

Phone Number

Thank you for contacting us. Our team will reach out to you momentarily.

The Eutex Team

Heavy Duty Aluminium Cable Cleat
Vendor: CMP Products


The CMP Products Zenith Two Bolt single cable cleat is a metallic cable cleat which has been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ (IEC 61914:2009). It ensures the retention and securing of single cables, without damaging or deforming the cable. The cable cleat is manufactured from high pressure die cast aluminium (LM20) making it suitable for both indoor and outdoor applications. Due to its unique twin arc internal patent pending design profile it exhibits excellent retention, limiting both the axial and lateral movement. The Zenith Two Bolt cable cleats have an excellent range take and are suitable for cable diameters of 38mm up to 151mm in only nine sizes. This cable cleat has two M12 clearance holes for securing it to a mounting surface, which allows for either M10 or M12 fasteners to be used.

Short Circuit Testing to IEC 61914:2009 - Clause 9.5
Multicore FormationParallel Formation
One short circuit (6.4.3) 600mm fixed cleat centresTwo short circuits (6.4.4) 600mm fixed cleat centresOne short circuit (6.4.3) 600mm fixed cleat centres 105mm cable centresTwo short circuits (6.4.4) 600mm fixed cleat centres 105mm cable centresOne short circuit (6.4.3) 600mm fixed cleat centres 105mm cable centresTwo short circuits (6.4.4) 600mm fixed cleat centres 105mm cable centres
0.1 sec0.1 sec0.1 sec0.1 sec1 sec1 sec
102kA Peak102kA Peak130kA Peak120kA Peak81kA Peak71kA Peak
48.6kA RMS48.6kA RMS59.0kA RMS54.5kA RMS36.8kA RMS36.1kA RMS
Type 6.1.1 Metallic 2BCAL - Two Bolt Aluminium Cable Cleat
Design Specification IEC 61914:2009
Temperature for permanent application -60°C to 150°C
IEC 61914:2009 clause / part 6.2
Needle Flame Test Pass
IEC 61914:2009 clause
10.0, 10.1, IEC 60695-11-5
Lateral Load Test 18kN - 32kN, IEC 61914:2009 clause 9.3
Axial Load Test 8kN, IEC 61914:2009 clause 9.4
Impact Resistance Pass - Very heavy
IEC 61914:2009 clause 6.3, 6.3.5, 9.2
Material High pressure die cast aluminium
Material Colour Silver / grey

Product Table


Zenith Part No.Cable Ø range take (mm)Dimensions mmWeight (g)
WHDPFixing Hole Ø
2BC038048A38 - 4896. x M10 / M12250
2BC048058A48 - 58107. x M10 / M12297
2BC058070A58 - 70119. x M10 / M12357
2BC070083A70 - 83133.0104.061.0104.02 x M10 / M12420
2BC083097A83 - 97147.0118.061.0118.02 x M10 / M12484
2BC096109A96 - 109160.0130.061.0131.02 x M10 / M12549
2BC106120A106 - 120172.0142.061.0143.02 x M10 / M12616
2BC120135A120 - 135187.0157.061.0158.02 x M10 / M12693
2BC135151A135 - 151201.0174.061.0172.02 x M10 / M12768


Zenith Part No.Cable Ø range take (in.)Dimensions (in.)Weight (oz)
WHDPFixing Hole Ø
2BC038048A1.496 - 1.8903.7802.6772.4022.6382 x M10 / M128.82
2BC048058A1.890 - 2.2834.2133.0712.4023.0712 x M10 / M1210.48
2BC058070A2.283 - 2.7564.6853.5832.4023.5432 x M10 / M1212.59
2BC070083A2.756 - 3.268 5.2364.0942.4024.0942 x M10 / M1214.82
2BC083097A3.268 - 3.8195.7874.6462.4024.6462 x M10 / M1217.07
2BC096109A3.780 - 4.2916.2995.1182.4025.1572 x M10 / M1219.37
2BC106120A4.173 - 4.7246.7725.5912.4025.6302 x M10 / M1221.73
2BC120135A4.724 - 5.3157.3626.1812.4026.2202 x M10 / M1224.44
2BC135151A5.315 - 5.9457.9136.8502.4026.7722 x M10 / M1227.09