Products > Triton CDS (T3CDS) Cable Gland
explosive atmosphere double seal univeral gland

Triton CDS (T3CDS) Cable Gland
explosive atmosphere double seal univeral gland

Globally Approved, Explosive Atmosphere Cable Gland

• Fully sequential, three step installation procedure
• Reduces installation times, cost & risk
• Direct & remote installation
• Unique compensating displacement seal system (CDS)
– Metal-to-metal installation every time regardless of cable diameter
• Designed to prevent Coldflow, see CMP Technical Document TS002
• Integral protected deluge seal
• Controlled outer ‘load retention’ seal
• Unique OSTG prevents overtightening
• -60°C to +130°C (standard), -20°C to 200°C (ThermEx option )
• Globally marked, IECEx, ATEX, UL & cCSAus
• EMC tested

† Grooved Cone (X) is predominantly used for Wire Braid (e.g. GSWB, TCWB), Steel Tape Armour (STA, DSTA) and Aluminium Strip Armour (ASA) but is also suitable for Single Wire Armour (SWA), Aluminium Wire Armour (AWA) and Pliable Wire Armour (PWA) if the range is outside that of the Stepped Cone (W).

Note: Grooved Cone (X) dimensions shown in the Cable Gland Selection Table below are for a double wire strand of braid armour cables. Tapes can also be doubled over. For cables that have only a single layer of armour such as SWA the clamping range should be used as shown in the table below.

Stepped (W) Cone is suitable for Single Wire Armour (SWA), or Aluminium Wire Armour (AWA) cables.

For under / oversized armour wires

For all types of Armoured Cables

Description

Triton CDS (T3CDS)

Triton CDS (T3CDS) explosive atmosphere barrier double seal universal cable glands are suitable for terminating all types of armored cables. Certified by ATEX for safe glanding of cables in Class 1, Zone 1, potentially explosive atmospheres, they feature a metal-to-metal sealing system that reduces costs, risks, and installation time.

This type of cable gland is manufactured to meet a wide array of standards, specifications, and codes. Examples include:

ATEX Certificates

  • CML 18ATEX1326X
  • CML 18ATEX4318X

Approvals

  • LRS: 01/00172 (E3)
  • DNV: TAE00000Y
  • ABS: 20-LD1948801-PDA
  • BV: 43180/A1BV

UL Compliance Standards

  • UL 514B Ed 5
  • UL 50 Ed 11
  • UL 2225 Ed 4
  • UL60079-0, 1, 7

IECEx Certificates

  • IECEx SIR 13.0027X
  • IECEx CML 18.0183X

UL Certificates

  • E200163

Code of Protection

  • Class I, Zone 1, AEx e II

Compliance Standards

  • IEC 60079-0,1,7,15,31

The Triton CDS cable gland utilizes a double-sealing mechanism, which includes an integral protected deluge seal and a controlled outer load-retention seal. It’s designed with a three-step installation process.

Available construction materials include brass, electroless nickel-plated brass, stainless steel, and aluminum constructions. EUTEX International’s standard offering is nickel-plated brass. Optional accessories include locknuts, earth tags, serrated washers, entry thread seals, shrouds, and ingress discs.

Standard cable operating environments are -60°C to +130°C, whereas ThermEx options are 20°C to 200°C. Many applications can benefit from integrating Triton CDS cable glands into their processes.

  • Aerospace
  • Defense
  • Chemical
  • Mining
  • Minerals & Metals
  • Commercial Construction
  • Downstream Hydrocarbons
  • Food & Beverage
  • Industrial Energy
  • Onsite Utilities

  • Industrial Machinery
  • Laboratory and R&D
  • Life Sciences
  • Medical
  • Marine
  • Oil & Gas
  • Packaging
  • Power
  • Pulp & Paper
  • Textiles
  • Water & Wastewate

Your Explosive Cable Gland Source

EUTEX International is a leading provider of electric cables and accessories for demanding industrial use. With an ISO 9001:2015-certified Quality Management System, every product we supply is guaranteed to be durable, effective, and of the highest quality. Strategically positioned locations worldwide enable us to deliver the electrical products you need on time and within budget.

Feel free to contact us about Triton cable gland products. Our experts are standing by to answer your questions.

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1073X
SIRA13ATEX4079X
Code of Protection II 2G,II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da,
II 3G Ex nR IIC Gc, I M2, Ex d I Mb, Ex e I Mb
Compliance Standards EN60079-0,1,7,15,31
IECEx Certificate IECEx SIR 13.0028X
IECEx SIM 14.0007X
Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
Compliance Standards IEC 60079-0,1,7,15,31
cCSAus Certificate (20s16 – 90) 1310517
CSAus Code of Protection Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure
Type 3, 4 and 4X,
Class I, Zone 1, AEx e II, AEx nR II
cCSA Code of Protection Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure
Type 3, 4 and 4X,
Ex d IIC, Ex e IIC, Ex nR II
Compliance Standards CAN/CSA-C22.2 No 0, 18, 25, 30, 94, 174, CAN/CSA-E60079-0, 1, 7,
ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0, 1, 7
UL Certificate (20s16 – 90) E200163
Code of Protection Class I, Zone 1, AEx e II
Compliance Standards UL514B
EAC Certificate (Formerly GOST R, K & B) C-GB.AA87.B.00487
UkrSEPRO UA.TR.047.C.0644-15
NEPSI Certificate GYJ13.1141X , GYJ13.1283X
CCOE / PESO (India) Certificate P333688
INMETRO Certificate TÜV 11.0374X
RETIE Certificate 03866
Marine Approvals LRS: 01/00172 (E4), DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1
Ingress Protection Rating ** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Aluminium Strip Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY/SY), Wire Braid Armour (e.g. SWB)
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Inner Bedding Sealing Ring: Compensating Displacement Seal (CDS), Outer Sheath Sealing Ring : Load Retention Seal (LRS)
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved Cone (X) Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
16 M16 15.0 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 78.7 16 T3CDS 1RA PVC36 0.18
20S16 M20 15.0 ½” 19.9 ¾” 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 78.7 20S16 T3CDS 1RA PVC36 0.20
20S M20 15.0 ½” 19.9 ¾” 6.1 11.6 9.5 15.9 0.3 1.0 0.8 1.25 24.0 26.4 78.7 20S T3CDS 1RA PVC36 0.20
20 M20 15.0 ½” 19.9 ¾” 6.5 13.9 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 76.2 20 T3CDS 1RA PVC06 0.28
25S M25 15.0 ¾” 20.2 1″ 11.1 19.9 14.0 22.0 0.4 1.2 1.25 1.6 37.5 41.3 88.8 25S T3CDS 1RA PVC09 0.44
25 M25 15.0 ¾” 20.2 1″ 11.1 19.9 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 88.7 25 T3CDS 1RA PVC09 0.44
32 M32 15.0 1″ 25.0 1 ¼” 17.0 26.2 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 90.7 32 T3CDS 1RA PVC11 0.63
40 M40 15.0 1 ¼” 25.6 1 ½” 22.0 32.1 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 93.2 40 T3CDS 1RA PVC15 0.91
50S M50 15.0 1 ½” 26.1 2″ 29.5 38.1 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 100.7 50S T3CDS 1RA PVC18 1.12
50 M50 15.0 2″ 26.9 2 ½” 35.6 44.0 40.4 53.0 0.6 1.6 2.0 2.5 70.1 77.1 105.8 50 T3CDS 1RA PVC21 1.60
63S M63 15.0 2″ 26.9 2 ½” 40.1 49.9 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 102.5 63S T3CDS 1RA PVC23 1.73
63 M63 15.0 2 ½” 39.9 3″ 47.2 55.9 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 105.4 63 T3CDS 1RA PVC25 1.78
75S M75 15.0 2 ½” 39.9 3″ 52.8 61.9 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 110.6 75S T3CDS 1RA PVC28 2.57
75 M75 15.0 3″ 41.5 3 ½” 59.1 67.9 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110.0 120.3 75 T3CDS 1RA PVC30 3.33
90 M90 24.0 3 ½” 42.8 4″ 66.6 78.6 76.2 90.3 0.8 1.6 3.15 4.0 115.0 126.5 138.9 90 T3CDS 1RA PVC32 4.87
100 M100 24.0 3 ½” 42.8 4″ 76.0 90.9 86.1 101.4 0.8 1.6 3.15 4.0 127.0 139.7 128.2 100 T3CDS 1RA LSF33 4.97
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 0.8 1.6 3.15 4.0 138.0 151.8 161.3 115 T3CDS 1RA LSF34 7.72
130 M130 24.0 5″ 46.8 97.0 114.9 110.2 123.2 0.8 1.6 3.15 4.0 157.0 172.7 173.3 130 T3CDS 1RA LSF35 9.78
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Ozs)
Standard Option Grooved Cone (X) Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
16 M16 15.0 0.12 0.34 0.24 0.52 0.01 0.04 0.03 0.05 0.94 1.04 3.10 16 T3CDS 1RA PVC36 6.35
20S16 M20 15.0 ½” 0.78 ¾” 0.12 0.34 0.24 0.52 0.01 0.04 0.03 0.05 0.94 1.04 3.10 20S16 T3CDS 1RA PVC36 7.05
20S M20 15.0 ½” 0.78 ¾” 0.24 0.46 0.37 0.63 0.01 0.04 0.03 0.05 0.94 1.04 3.10 20S T3CDS 1RA PVC36 7.05
20 M20 15.0 ½” 0.78 ¾” 0.26 0.55 0.49 0.82 0.02 0.04 0.03 0.05 1.20 1.32 3.00 20 T3CDS 1RA PVC06 9.88
25S M25 15.0 ¾” 0.80 1″ 0.44 0.78 0.55 0.87 0.02 0.05 0.05 0.06 1.48 1.63 3.50 25S T3CDS 1RA PVC09 15.52
25 M25 15.0 ¾” 0.80 1″ 0.44 0.78 0.72 1.03 0.02 0.05 0.05 0.06 1.48 1.63 3.49 25 T3CDS 1RA PVC09 15.52
32 M32 15.0 1″ 0.98 1 ¼” 0.67 1.03 0.93 1.33 0.02 0.05 0.06 0.08 1.81 1.99 3.57 32 T3CDS 1RA PVC11 22.22
40 M40 15.0 1 ¼” 1.01 1 ½” 0.87 1.26 1.10 1.59 0.02 0.06 0.06 0.08 2.17 2.38 3.67 40 T3CDS 1RA PVC15 32.10
50S M50 15.0 1 ½” 1.03 2″ 1.16 1.50 1.39 1.84 0.02 0.06 0.08 0.10 2.36 2.60 3.96 50S T3CDS 1RA PVC18 39.51
50 M50 15.0 2″ 1.06 2 ½” 1.40 1.73 1.59 2.09 0.02 0.06 0.08 0.10 2.76 3.04 4.17 50 T3CDS 1RA PVC21 56.44
63S M63 15.0 2″ 1.06 2 ½” 1.58 1.96 1.80 2.34 0.02 0.06 0.08 0.10 2.95 3.25 4.04 63S T3CDS 1RA PVC23 61.02
63 M63 15.0 2 ½” 1.57 3″ 1.86 2.20 2.15 2.59 0.02 0.06 0.08 0.10 3.15 3.46 4.15 63 T3CDS 1RA PVC25 62.79
75S M75 15.0 2 ½” 1.57 3″ 2.08 2.44 2.32 2.83 0.02 0.06 0.08 0.10 3.54 3.90 4.35 75S T3CDS 1RA PVC28 90.65
75 M75 15.0 3″ 1.63 3 ½” 2.33 2.67 2.63 3.09 0.02 0.06 0.10 0.12 3.94 4.33 4.74 75 T3CDS 1RA PVC30 117.46
90 M90 24.0 3 ½” 1.69 4″ 2.62 3.09 3.00 3.56 0.03 0.06 0.12 0.16 4.53 4.98 5.47 90 T3CDS 1RA PVC32 171.78
100 M100 24.0 3 ½” 1.69 4″ 2.99 3.58 3.39 3.99 0.03 0.06 0.12 0.16 5.00 5.50 5.05 100 T3CDS 1RA LSF33 175.31
115 M115 24.0 4″ 1.73 5″ 3.39 3.85 4.00 4.34 0.03 0.06 0.12 0.16 5.43 5.98 6.35 115 T3CDS 1RA LSF34 272.32
130 M130 24.0 5″ 1.84 3.82 4.52 4.34 4.85 0.03 0.06 0.12 0.16 6.18 6.80 6.82 130 T3CDS 1RA LSF35 344.98
Dimensions displayed in inches unless otherwise stated

Download Spec Sheet

Download

Triton CDS (T3CDS)

Triton CDS (T3CDS) explosive atmosphere barrier double seal universal cable glands are suitable for terminating all types of armored cables. Certified by ATEX for safe glanding of cables in Class 1, Zone 1, potentially explosive atmospheres, they feature a metal-to-metal sealing system that reduces costs, risks, and installation time.

This type of cable gland is manufactured to meet a wide array of standards, specifications, and codes. Examples include:

ATEX Certificates

  • CML 18ATEX1326X
  • CML 18ATEX4318X

Approvals

  • LRS: 01/00172 (E3)
  • DNV: TAE00000Y
  • ABS: 20-LD1948801-PDA
  • BV: 43180/A1BV

UL Compliance Standards

  • UL 514B Ed 5
  • UL 50 Ed 11
  • UL 2225 Ed 4
  • UL60079-0, 1, 7

IECEx Certificates

  • IECEx SIR 13.0027X
  • IECEx CML 18.0183X

UL Certificates

  • E200163

Code of Protection

  • Class I, Zone 1, AEx e II

Compliance Standards

  • IEC 60079-0,1,7,15,31

The Triton CDS cable gland utilizes a double-sealing mechanism, which includes an integral protected deluge seal and a controlled outer load-retention seal. It’s designed with a three-step installation process.

Available construction materials include brass, electroless nickel-plated brass, stainless steel, and aluminum constructions. EUTEX International’s standard offering is nickel-plated brass. Optional accessories include locknuts, earth tags, serrated washers, entry thread seals, shrouds, and ingress discs.

Standard cable operating environments are -60°C to +130°C, whereas ThermEx options are 20°C to 200°C. Many applications can benefit from integrating Triton CDS cable glands into their processes.

  • Aerospace
  • Defense
  • Chemical
  • Mining
  • Minerals & Metals
  • Commercial Construction
  • Downstream Hydrocarbons
  • Food & Beverage
  • Industrial Energy
  • Onsite Utilities

  • Industrial Machinery
  • Laboratory and R&D
  • Life Sciences
  • Medical
  • Marine
  • Oil & Gas
  • Packaging
  • Power
  • Pulp & Paper
  • Textiles
  • Water & Wastewate

Your Explosive Cable Gland Source

EUTEX International is a leading provider of electric cables and accessories for demanding industrial use. With an ISO 9001:2015-certified Quality Management System, every product we supply is guaranteed to be durable, effective, and of the highest quality. Strategically positioned locations worldwide enable us to deliver the electrical products you need on time and within budget.

Feel free to contact us about Triton cable gland products. Our experts are standing by to answer your questions.

Technical

Design Specification BS 6121:Part 1:1989, IEC 62444, EN 62444
Mechanical Classifications* Impact = Level 8, Retention = Class D
Enclosure Protection IK10 to IEC 62262 (20 joules) Brass & Stainless Steel only
Electrical Classifications* Category B (Category A when used with braid, tape or pliable wire armour cables)
ATEX Certificate SIRA13ATEX1073X
SIRA13ATEX4079X
Code of Protection II 2G,II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da,
II 3G Ex nR IIC Gc, I M2, Ex d I Mb, Ex e I Mb
Compliance Standards EN60079-0,1,7,15,31
IECEx Certificate IECEx SIR 13.0028X
IECEx SIM 14.0007X
Code of Protection Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
Compliance Standards IEC 60079-0,1,7,15,31
cCSAus Certificate (20s16 – 90) 1310517
CSAus Code of Protection Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure
Type 3, 4 and 4X,
Class I, Zone 1, AEx e II, AEx nR II
cCSA Code of Protection Class I, Div 2, Groups A,B,C and D, Class II, Div 2, Groups E,F and G, Class III, Enclosure
Type 3, 4 and 4X,
Ex d IIC, Ex e IIC, Ex nR II
Compliance Standards CAN/CSA-C22.2 No 0, 18, 25, 30, 94, 174, CAN/CSA-E60079-0, 1, 7,
ANSI/UL 514B Ed 5, ANSI/UL 50 Ed 11, ANSI/UL 2225 Ed 4, UL60079-0, 1, 7
UL Certificate (20s16 – 90) E200163
Code of Protection Class I, Zone 1, AEx e II
Compliance Standards UL514B
EAC Certificate (Formerly GOST R, K & B) C-GB.AA87.B.00487
UkrSEPRO UA.TR.047.C.0644-15
NEPSI Certificate GYJ13.1141X , GYJ13.1283X
CCOE / PESO (India) Certificate P333688
INMETRO Certificate TÜV 11.0374X
RETIE Certificate 03866
Marine Approvals LRS: 01/00172 (E4), DNV: TAE00000Y, ABS: 14-LD234401A-4-PDA, BV: 43180/A1
Ingress Protection Rating ** IP66, IP67 & IP68
Deluge Protection Compliance DTS01 : 91
Cable Gland Material Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel
Seal Material CMP SOLO LSF Halogen Free Thermoset Elastomer
Cable Type Single Wire Armour (SWA), Aluminium Wire Armour (AWA), Pliable Wire Armour (PWA), Steel Tape Armour (STA), Aluminium Strip Armour (ASA), Screened Flexible (EMC) Wire Braid (e.g. CY/SY), Wire Braid Armour (e.g. SWB)
Armour Clamping Reversible Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Inner Bedding Sealing Ring: Compensating Displacement Seal (CDS), Outer Sheath Sealing Ring : Load Retention Seal (LRS)
Sealing Area(s) Cable Inner Bedding & Outer Cable Sheath
Optional Accessories Locknuts, Earth Tags, Serrated Washers, Entry Thread Seals, Shrouds,Ingress Discs
Optional Installation Tools Spanners, Armour Former Tool

Product Table

Metric

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Kgs)
Standard Option Grooved Cone (X) Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
16 M16 15.0 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 78.7 16 T3CDS 1RA PVC36 0.18
20S16 M20 15.0 ½” 19.9 ¾” 3.1 8.6 6.1 13.1 0.3 1.0 0.8 1.25 24.0 26.4 78.7 20S16 T3CDS 1RA PVC36 0.20
20S M20 15.0 ½” 19.9 ¾” 6.1 11.6 9.5 15.9 0.3 1.0 0.8 1.25 24.0 26.4 78.7 20S T3CDS 1RA PVC36 0.20
20 M20 15.0 ½” 19.9 ¾” 6.5 13.9 12.5 20.9 0.4 1.0 0.8 1.25 30.5 33.6 76.2 20 T3CDS 1RA PVC06 0.28
25S M25 15.0 ¾” 20.2 1″ 11.1 19.9 14.0 22.0 0.4 1.2 1.25 1.6 37.5 41.3 88.8 25S T3CDS 1RA PVC09 0.44
25 M25 15.0 ¾” 20.2 1″ 11.1 19.9 18.2 26.2 0.4 1.2 1.25 1.6 37.5 41.3 88.7 25 T3CDS 1RA PVC09 0.44
32 M32 15.0 1″ 25.0 1 ¼” 17.0 26.2 23.7 33.9 0.4 1.2 1.6 2.0 46.0 50.6 90.7 32 T3CDS 1RA PVC11 0.63
40 M40 15.0 1 ¼” 25.6 1 ½” 22.0 32.1 27.9 40.4 0.4 1.6 1.6 2.0 55.0 60.5 93.2 40 T3CDS 1RA PVC15 0.91
50S M50 15.0 1 ½” 26.1 2″ 29.5 38.1 35.2 46.7 0.4 1.6 2.0 2.5 60.0 66.0 100.7 50S T3CDS 1RA PVC18 1.12
50 M50 15.0 2″ 26.9 2 ½” 35.6 44.0 40.4 53.0 0.6 1.6 2.0 2.5 70.1 77.1 105.8 50 T3CDS 1RA PVC21 1.60
63S M63 15.0 2″ 26.9 2 ½” 40.1 49.9 45.6 59.4 0.6 1.6 2.0 2.5 75.0 82.5 102.5 63S T3CDS 1RA PVC23 1.73
63 M63 15.0 2 ½” 39.9 3″ 47.2 55.9 54.6 65.8 0.6 1.6 2.0 2.5 80.0 88.0 105.4 63 T3CDS 1RA PVC25 1.78
75S M75 15.0 2 ½” 39.9 3″ 52.8 61.9 59.0 72.0 0.6 1.6 2.0 2.5 90.0 99.0 110.6 75S T3CDS 1RA PVC28 2.57
75 M75 15.0 3″ 41.5 3 ½” 59.1 67.9 66.7 78.4 0.6 1.6 2.5 3.0 100.0 110.0 120.3 75 T3CDS 1RA PVC30 3.33
90 M90 24.0 3 ½” 42.8 4″ 66.6 78.6 76.2 90.3 0.8 1.6 3.15 4.0 115.0 126.5 138.9 90 T3CDS 1RA PVC32 4.87
100 M100 24.0 3 ½” 42.8 4″ 76.0 90.9 86.1 101.4 0.8 1.6 3.15 4.0 127.0 139.7 128.2 100 T3CDS 1RA LSF33 4.97
115 M115 24.0 4″ 44.0 5″ 86.0 97.9 101.5 110.2 0.8 1.6 3.15 4.0 138.0 151.8 161.3 115 T3CDS 1RA LSF34 7.72
130 M130 24.0 5″ 46.8 97.0 114.9 110.2 123.2 0.8 1.6 3.15 4.0 157.0 172.7 173.3 130 T3CDS 1RA LSF35 9.78
Dimensions displayed in millimeters unless otherwise stated

Imperial

Cable Gland Size Available Entry Threads “C” (Alternate Metric Thread Lengths Available) Cable
Bedding
Diameter
“A”
Overall
Cable
Diameter
“B”
Armour Range Across
Flats
“D”
Across
Corners
“D”
Protrusion
Length “F”
Combined Ordering Reference
(*Brass Metric)
Shroud Cable
Gland
Weight
(Ozs)
Standard Option Grooved Cone (X) Stepped Cone (W)
Metric Thread Length (Metric) “E” NPT Thread Length
(NPT) “E”
NPT Min Max Min Max Min Max Min Max Max Max Size Type Ordering
Suffix
16 M16 15.0 0.12 0.34 0.24 0.52 0.01 0.04 0.03 0.05 0.94 1.04 3.10 16 T3CDS 1RA PVC36 6.35
20S16 M20 15.0 ½” 0.78 ¾” 0.12 0.34 0.24 0.52 0.01 0.04 0.03 0.05 0.94 1.04 3.10 20S16 T3CDS 1RA PVC36 7.05
20S M20 15.0 ½” 0.78 ¾” 0.24 0.46 0.37 0.63 0.01 0.04 0.03 0.05 0.94 1.04 3.10 20S T3CDS 1RA PVC36 7.05
20 M20 15.0 ½” 0.78 ¾” 0.26 0.55 0.49 0.82 0.02 0.04 0.03 0.05 1.20 1.32 3.00 20 T3CDS 1RA PVC06 9.88
25S M25 15.0 ¾” 0.80 1″ 0.44 0.78 0.55 0.87 0.02 0.05 0.05 0.06 1.48 1.63 3.50 25S T3CDS 1RA PVC09 15.52
25 M25 15.0 ¾” 0.80 1″ 0.44 0.78 0.72 1.03 0.02 0.05 0.05 0.06 1.48 1.63 3.49 25 T3CDS 1RA PVC09 15.52
32 M32 15.0 1″ 0.98 1 ¼” 0.67 1.03 0.93 1.33 0.02 0.05 0.06 0.08 1.81 1.99 3.57 32 T3CDS 1RA PVC11 22.22
40 M40 15.0 1 ¼” 1.01 1 ½” 0.87 1.26 1.10 1.59 0.02 0.06 0.06 0.08 2.17 2.38 3.67 40 T3CDS 1RA PVC15 32.10
50S M50 15.0 1 ½” 1.03 2″ 1.16 1.50 1.39 1.84 0.02 0.06 0.08 0.10 2.36 2.60 3.96 50S T3CDS 1RA PVC18 39.51
50 M50 15.0 2″ 1.06 2 ½” 1.40 1.73 1.59 2.09 0.02 0.06 0.08 0.10 2.76 3.04 4.17 50 T3CDS 1RA PVC21 56.44
63S M63 15.0 2″ 1.06 2 ½” 1.58 1.96 1.80 2.34 0.02 0.06 0.08 0.10 2.95 3.25 4.04 63S T3CDS 1RA PVC23 61.02
63 M63 15.0 2 ½” 1.57 3″ 1.86 2.20 2.15 2.59 0.02 0.06 0.08 0.10 3.15 3.46 4.15 63 T3CDS 1RA PVC25 62.79
75S M75 15.0 2 ½” 1.57 3″ 2.08 2.44 2.32 2.83 0.02 0.06 0.08 0.10 3.54 3.90 4.35 75S T3CDS 1RA PVC28 90.65
75 M75 15.0 3″ 1.63 3 ½” 2.33 2.67 2.63 3.09 0.02 0.06 0.10 0.12 3.94 4.33 4.74 75 T3CDS 1RA PVC30 117.46
90 M90 24.0 3 ½” 1.69 4″ 2.62 3.09 3.00 3.56 0.03 0.06 0.12 0.16 4.53 4.98 5.47 90 T3CDS 1RA PVC32 171.78
100 M100 24.0 3 ½” 1.69 4″ 2.99 3.58 3.39 3.99 0.03 0.06 0.12 0.16 5.00 5.50 5.05 100 T3CDS 1RA LSF33 175.31
115 M115 24.0 4″ 1.73 5″ 3.39 3.85 4.00 4.34 0.03 0.06 0.12 0.16 5.43 5.98 6.35 115 T3CDS 1RA LSF34 272.32
130 M130 24.0 5″ 1.84 3.82 4.52 4.34 4.85 0.03 0.06 0.12 0.16 6.18 6.80 6.82 130 T3CDS 1RA LSF35 344.98
Dimensions displayed in inches unless otherwise stated