Get it right
before you build.
Our engineers inspect, classify, and document before procurement begins.
The most expensive problems in hazardous area projects do not happen during construction. They become evident when an area classification is incorrect, equipment is incorrectly specified or installed, or compliance documentation reaches certification incomplete. By then, the cost of fixing it is measured in weeks, not hours – and often at significant cost.
EUTEX Specify prevents that. Our engineers inspect, classify, and document before procurement begins. The right products are ordered. The compliance documentation is structured from day one. The path to certification is clear before a single cable is pulled.
Confidence where it is critical.
Services
Four services.
One specification team.
EUTEX Specify covers the full pre-project scope – from area classification through to inspection and compliance review. Whether you are starting a new installation or reviewing an existing one before certification, these four services establish what a compliant project looks like and where the gaps are.
Frequently
asked
Common questions about hazardous area specification.
01
What is a hazardous location inspection?
What is a hazardous location inspection?
A hazardous location inspection is a formal examination of electrical equipment and installations in areas where explosive atmospheres may be present. Inspections are conducted to IEC 60079-17 or NEC Article 500 standards depending on jurisdiction, and confirm that equipment remains suitable for its classified location. A qualified inspector issues a written report covering findings, non-conformances, and recommended remedial actions.
02
What is hazardous location classification?
What is hazardous location classification?
Hazardous location classification is the process of defining and documenting the boundaries of locations where explosive atmospheres may be present. Under NEC (US), locations are classified as Class I, II, or III – Division 1 or 2. Under IEC standards, locations are classified as Zone 0, 1, or 2. Accurate classification determines which equipment is approved for use in each area – errors at this stage lead to non-compliant installations and failed certification.
03
What is an engineering design review for hazardous locations?
What is an engineering design review for hazardous locations?
An engineering design review is a structured examination of engineering drawings, equipment specifications, and technical documentation against applicable NEC and IEC hazardous location standards. It is conducted before installation begins to identify non-conformances and specification gaps early – when the cost of correction is low. The output is a written report with findings and recommended actions.
04
What is the difference between NEC and IEC hazardous location standards?
What is the difference between NEC and IEC hazardous location standards?
NEC (National Electrical Code) is the US standard for hazardous locations, using a Class and Division classification system under Articles 500-516. IEC standards, particularly the IEC 60079 series, use a Zone classification system applied in most international and offshore projects. EUTEX is capable in both systems, which is critical for projects that cross jurisdictions or involve international certification requirements.
Still have questions?
Ready to
Certify?
From first inspection to final certificate.
Specification
that held up.
Real projects.
Compliant outcomes.
On schedule.
Specify
FPSO Cable Project
Manage the procurement of Electrical Cable for a major FPSO Project.
Read more
Certify
Aerospace Compliance
Consistent hazardous-area competence across multiple sites supporting mission safety.
Read more
Supply + Certify
OEM Supply & Certification
Long-term hazardous-area compliance to meet client requirements
Read more
Specification complete.
Now procure with confidence.
The area classification is defined. The documentation is in place. The next step is the right products, compliant cable systems and hazardous area equipment.
in stock and ready to ship.
Start with the
right specification.
Finish with
compliant delivery.
Book an inspection or speak to our engineering team.